My main water line to the sprinkler system came loose and flooded my vacation home yard with 250,000 gallons of water before the leak was discovered and repaired.  Does Netro have the ability to control an electric valve on this feeder line such that the main valve will only open when the irrigation system calls for water?

Raining hard outside for at least 20 minutes but yet, Netro weather n others didn't detect it?

It looks like the sprinklers are not jumping out because of the water pressure is maybe down right after I installed pixie

Even after several hours in full sun my Whisperer looks dead and does not send any signal.

Shirt or long pushes on the button does not change anything.

I suppose that while not that old I have to buy a new one.

Thanks for your advice

All the zone were off in the application but in the device the zone 5 opened the passage of current to the valve remaining opened 

Hello all!

I've just installed the Pixie smart house faucet timer and whenever I try to link the Netro service to my Google Home I get a message saying no devices can be found.

Is there some setting I need to enable to allow the device to be found by Google Home?

If the system lost the connection, it keeps the last schedule?

I am worry about the wstering and I am far away from home.

Thanks

Hello, I’ve often thought it would be nice to have the ability to control my smart watering a little further by say, having a percentage adjustment? I’ve played with the settings and gone from Normal watering to Eco to Frequent but find that the differences are more distinct than I want them. Is there a way or maybe an update coming that will allow me to simply put that I want to water 70, 80 percent, etc? I could much more easily manage my water bill and usage with that handy feature. Please let me know if I’m missing it somewhere! Thanks!!

At the end of the whisperer's learning time, the times are set automatically in the program or have to be done manually?

Hi all!

I have a “Netro Sprinkler WIFI Smart Controller” and when  sometime i have a problem with internet connection provider and  after the connection return up the controller still disconnect until i power-off and power-on the controller.

The led on controller blinking and the app show a off-line message.

 

Why Netro doesn’t automaticaly retry the connection ?

All other ethernet and wifi device automaticaly reconnect  after the connection return up.  It’s possibile configure Netro Controller to retry the wifi connection ot it’s a contoller bugs ?

 

 

Netro App vesion: 3.1.0

Netro controller hw ver.: 1.2

Netro controller firmware ver:  1.1.1

 

Thanks in advance.

Gianluca

 

Hi, my sprite is offline since 14 hours and I did not receive any notification on my smartphone.

Is it correct? How can I enable notifications as soon as the sprite is offline? 

Thank you

Carlo

Hi, anyone knows if the white lights on the hardware could be turned off? Thanks 

I had stablished a new whispered as stand alon( I área associated). In the installation it gave me an error and now, the option to asóciate again to stand alone is not visible. Neither the whisper to be deleted.

When trying to reconnect show whisper already in my account 

Hello

How do I reset the whisperer

Thanks

Unfortunately, this is not watering at all. Please reach out to me! GCarman2000@gmail.com

Hi,

I have a repeating program set up for 2 zones.

I have smart watering disabled for those zones, because I prefer to set my watering at specific times and days. but I have it set to not water if I have 5mm  rain option.

My question is, can I have smart watering turned off but still have the app cancel my repeating program if it rains more than 5mm?

Have I got the settings correct? 

System has been drained. Controller unplugged. Notification and location turned off. When I try to turn off “Enabled” it turns right back on. Can I shut down the app?

Ciao, una domanda.

Qual'é l'umidità minima migliore e massima migliore per il centro Italia?

Grazie 

I have historical irrigation on zone “n” and I can get schedule data from the API if the zone is turn ON, but if I put this zone in unavailable, the API does not get the historical schedule data for this zone. I have to manually put available the zone, download from API, and then turn off this zone for get the whole data.

I think is not the expected behavior.

Jose

I’ve tried all of the trouble shooting and suggested steps to reconnect my Sprite 6 to my home network.  I’ve been trying for weeks.  I need to speak to someone in person to try to resolve this.  I either need a phone number to call or need someone to contact me at (414) 949-1944.

Thanks,

Bob