Más filtros

New Pixie, not getting past step 3?

milanese
Actualizado 2022-05-27 02:32:57 UTC 

iPhone -

- Get app

- Crete account

- Go to connect timer

- Next

- Enter name and stuff, next

- Turn on unit, next

- Connect to Netro_* wifi, next


"Please connect to wifi network "Netro_*"......


I have disabled the IP security on the iPhone side. 


Please advise.


Ver: 1549   Respuesta: 1

Connection issues

Ant Va
Actualizado 2022-05-27 09:57:09 UTC 

Good morning,

Randomly my device loses connection and keeps blinking.  I have to turn it off and on for it to get the network back.  The Sprite is five meters from the router and next to other devices that have a good connection at all times.

Thanks 

Ver: 1935   Respuesta: 3

Netro screwed up

Jack Davis
Actualizado 2022-05-28 16:14:25 UTC 

I'm not sure what Netro did to the App over the winter but it does not function worth a damn. We turn on one zone manually and shut it off and try and turn on another zone and the first zone state is also on. 

One of our customers has a problem where all zones come on a one time.

Bring back the last version!!!


Ver: 1813   Respuesta: 1

Schedule is empty?

Jacopo De Simoi
Actualizado 2022-05-29 02:44:51 UTC 

I just installed the pixie timer and i would like to test it. 

However even if i scheduled two test runs, none of them appears in the schedule yet.  Is the schedule updated only once a day? 

Manual run is not available (the timer appears strike-out) so i cannot even test that way.

Thanks in advance for your help


Best 

 Jacopo





Ver: 1786   Respuesta: 1

Val Smith
Actualizado 2022-06-30 23:53:11 UTC 

Ver: 1780   Respuesta: 2

Val Smith
Actualizado 2022-06-30 23:52:31 UTC 

Ver: 1800   Respuesta: 1

Schedule screen

Dick Milde
Actualizado 2022-05-30 14:02:03 UTC 
On my schedule screen sometimes I have an “!” mark. Sometimes it’s a “i” If I tap on the zone it takes me to preferences. Did I make a change that I am not aware of? What does this mean?  Thanks. 
Ver: 1585   Respuesta: 1

Setting up the schedule

Sasha Obradovic
Actualizado 2022-05-30 22:11:58 UTC 
Tema: General

Hello,

I’m trying to setup schedule for watering for next five months, But watering schedule shows only for two next months. I check the settings and I do have a selected five next month. is there something I’m not doing right?

Ver: 2074   Respuesta: 2

How many zones for the Whisperer Sensor

Andy Ricco
Actualizado 2022-05-31 06:12:27 UTC 

Hello,

I can only add a maximum of 3 zones to my Whisperer Sensor. I wanted to add all my 6 zones to it? Is that possible? 


Thanks

Ver: 1835   Respuesta: 1

Zone

Bertin Grégory
Actualizado 2022-05-31 15:50:10 UTC 
Bonjour
Serait-il possible d’activer 2 zones en même temps réfléchi
Ver: 2884   Respuesta: 2

Why is there no on/off

Eric Berndt
Actualizado 2022-06-01 19:01:43 UTC 
I need to go outside to toggle this thing on off manually which defeats the purpose of having it.
Ver: 2360   Respuesta: 2

Back on the app should not exit the app

Eric Berndt
Actualizado 2022-06-01 19:02:18 UTC 
Just go to last page, standard UX
Ver: 2284   Respuesta: 0

Schedule keeps overriding programs

Eric Berndt
Actualizado 2022-06-01 19:03:43 UTC 
Weeper hoses need to run for hours, the only option in smart scheduling is drip irrigation which is having it max out at like 30 mins a day 
Ver: 2302   Respuesta: 1

PWS invalid

Giovanni Franceschini
Actualizado 2022-06-01 19:16:43 UTC 

Trying to add ISANREMO24 to PWS but I always get this error:

Please enter a valid ID !


Can you fix the problem or add for me:

ISANREMO24


Thanks Giovanni 
Ver: 2445   Respuesta: 1

Reset rain delay to 0 (null)

Bruce Abbott
Actualizado 2022-06-02 22:18:21 UTC 

My rain delay is set to 15 days. How do I reset or delete the current delay?


The program is now scheduled 15 days out, and I have disabled and re-enabled my program in hopes it would reset it. I checked restrictions and the delay is not listed.


Thanks!

Ver: 2420   Respuesta: 1

Whisperer sensor not activating.

Sid Smith
Actualizado 2022-06-02 22:21:42 UTC 
Sensor was removed thru winter. Now will not activate and shows single red light only. Been in direct sun for 3 days so fully charged. Cannot get white light to reprogram.
Ver: 2452   Respuesta: 1

Move a Zone between Terminals

Gian Piero Pepino
Actualizado 2022-06-03 12:13:40 UTC 
Hello.
Is it possible to move a Zone, in my case: "Prato e back giardino" from Terminal 2 to Terminal 3 in a efficient way?
Let's say, for instance:  Copy Zone "Prato e back giardino" or Move "Prato e back giardino" from Terminal2 to Terminal 3, without being obliged to cancel the previous and reprogram all in a new Zone?

I've a problem with Terminal 2: the wire broke inside and I am not able to remove it ....

Thanx a lot
Gian Piero

Ver: 2768   Respuesta: 1

Any plans on adding a "move schedule ahead XX days" feature?

Kurt H
Actualizado 2022-06-03 20:40:34 UTC 
I would LOVE to have a way to move a days scheduled run (and all subsequent runs) ahead XX days.  For example, if I have all my zones scheduled to run tomorrow, but it is raining today (and I'm scheduled for every third day runs), it would be great to move tomorrow's run ahead 2 days (as maybe it's not raining TOO hard, but enough to warrant not watering tomorrow), and then that move trigger all subsequent runs to move ahead by that many days as well.  Any plans for such a feature?
Ver: 2517   Respuesta: 1

What is the exclamation mark on schedule?

Simon Clark
Actualizado 2022-06-04 07:26:36 UTC 
What does the  exclamation mark mean in the schedule pages?  Does this mean that they haven't run?? If so this is a major fail on the part of an irrigation system and should surely at the least result in notifications to the phone or email to alert?  I've had plants die in the last week of very dry weather as I assumed this was watering daily as per the advanced settings. s
Ver: 2541   Respuesta: 2

How can I tell if it skipped a day due to rain or excess moisture?

Jeff W
Actualizado 2022-06-04 12:43:04 UTC 
With the Pixie is there a way in app (and if so where) to see if it skipped a day because either the sensor reported that the soil moisture was above the threshold set or because the weather provider predicted enough rain to cancel it?
Ver: 2354   Respuesta: 1