Hi

Although the app tells me I’m on line my sprinklers will not activate. I’m not sure if there been a recent update, however had the same problem last year with firm wear. I’m based in the UK, so not sure if this makes a difference 

Please help

Dear sirs,

why you don't show the subsoil humidity in the app?

Please add in next revision. 

Thanks.

I can not change the time (number of minutes) for watering to happen. please help.

Two of the zones are 45 minutes and 60 minutes and they work.

I’ve 2 separate gardens, the first one has 2 zones and ( names: zone 1 and 2, they irrigate the left side and the right side of this garden) the second only one (Zone 3). I would like to connect zones one and two, to avoid, as it often happens, that zones one and two are watered on different days.  example: has watered zones 1 and 3 today, tomorrow it plans to water only zone 2. can someone help me?

It has been working for 3 weeks, but now it does not. 

I have checked all 7 zones. No wiring issues. Has proper voltage. 

It just won't come on. How do I get it to work again. This is a new unit. Sprinklers are all fine and had a tune up when the Sprite was installed. 

I have unplugged it and plugged it back in. I need help soon, I have new sod and many new plants in my yard and gardens. 

hello, 

finally the Whisperer sensors are wonderful.  I installed the 3 sensors divided by zones, a single problem that I encountered is this: the sensor that I called Prato should group 4 zones because they are part of the same type of plant, instead it only groups 3 zones.  I need your help.  

Thanks

Andrea

Ciao... Io rinomino le zone e quando gli do il comando con Alexa per irrigare una determinata zona rinominata non capisce e irrigua tutte le zone... Come si può fare? 

Is there a way to see the wifi strength from the sensor.   From the phone I have good strength but from as far as the sensor it comes and goes for reporting.   Thanks!

I had Smart Scheduling enabled on all zones and then I turned off smart scheduling for all zones but the smart schedules for the next 30 days do not go away. Appears no way to delete them?

My Netro Whisperer sensor LED changed colors from blue to red on its own.  Is this normal?

Hello,

 Is there a way to use the subsoil reading vs the topsoil reading from the sensor.  For example the top soil reading always reads 100% but the sub soil says 55% which is more believable in Florida's Sandy soil.  The unit did not water for 27 days and still read 99% and sub soil at 20%.  I watered it to see if it would change.  When I take the sensor out of the ground it does change state.  

When you select the year view you see only 12 months. Instead it would be useful to add 13, so I could compare year over year the same month.

Not only the last 12 months

Hello,

Is there a way to use only master valve Without engaging any other zones?

Feature request: 

I think only US starts the week on sunday, in Europe we Start the week on Monday, not Sunday

Does it automatically stop if it rains? 

Got a notification today that tells me to "Water Your Sensor Today".

Does anyone know if I am supposed to pull the sensor out to clean it or just water the surrounding area of the sensor or do I pour water directly on to the sensor's solar battery surface?

hello,

 I have a problem with a Whisperer, it turns off, when turned on it detects the data, after an hour it should detect the data again instead it turns off.  I bought 3, the other 2 work perfectly.  I send you photos of zone 6 where the Whisperer is connected.  I did the reconfiguration again but nothing has changed.  I need help.

Thanks

Andrea

Can I install the Sprite control unit at exterior location? Can it be installed at exterior weather exposure (rain) or sun light?

Hi,

I have the netro connected to one water source.

Now I am going to install a vertical garden with very low flow and I want the source of water to be a different one from the main source for the garden.

Is there a way I can connect it as an independent solenoide valve that doesn't need to have the master turned on ?

Thank you,

Carlos

I’m trying to water manually with my pixie but when I click “play” it just goes to pending and never starts watering. How do I fix this?