更多筛选条件

Manual watering stops before end of schedule

Patrice Kestenberg
更新时间 2021-08-29 16:13:57 UTC 
话题: 安装

Hi,

I’ve got a sprite 6 system with 3 zones configured and no master valve

The watering stops before the end of planned schedule. 

So I’ve deactivated all smart function to check, manual launch planned for 5 minutes. 

It starts and after 15seconds it stops watering. 


Any idea why?

浏览: 2599   回复: 1

Whisperer not working right.

vkanaga
更新时间 2021-08-27 23:46:35 UTC 
My Whisperer seems constantly reading 91% moisture when I know for a fact it is NOT ?  Any ideas or how can I report this it is like 2 weeks old ?
浏览: 1978   回复: 1

Delete all schedules

Sharwell
更新时间 2021-08-27 14:41:04 UTC 
话题: 通用
I have added too many schedules on top of smart watering. How can I delete and start all over?
浏览: 2192   回复: 3

Disconnect wifi almost every day without reasong

paolo cellini
更新时间 2021-08-26 14:17:28 UTC 

Hi

Netro disconnect almost every day 

from wifi , without any reason(such as  Internet connection  missing / electricity black out ) 

I have to unplug and rebooting  it goes back automatically to wifi connection

What i have to do to avoid this ? 


浏览: 2014   回复: 2

Adjusting Rain Fall

Mike Jones
更新时间 2021-08-24 09:19:23 UTC 
话题: Netro App

Hi guys an girls. 


New to the whole netro system, have my system all installed and set up. My question is the weather, the smart watering has moved the schedule due to. The weather saying we had rain yesterday. But there was no rain fall in my area yesterday. I've tried to correct this in the app but it will only let me select 1mm as the minimum value. Even this is adjusting my schedule. So it's not really that smart if it's claiming to have rained when it didn't an not allowing me to input the correct amount. This need to be addressed in a future app update as if the app thinks it has rained and it has not I need to be able to correct this. 


Regards

Miky 

浏览: 1965   回复: 2

trouble connecting sprite to wifi

Gary Walloch
更新时间 2021-08-22 13:48:00 UTC 
I reset my netro sprite as work was being done on my sprinkler system.  It came back on slow blink.  I have not been able to reconnect to my internet.  when setting up netro shows up on my phone with good wifi connection, but will not connect. I have turned data off and still not luck. I have unplugged Netro sprite and still no luck. If anyone has any ideas please share.
浏览: 2030   回复: 1

How are people rebooting the device when it goes offline?

Michael Gough
更新时间 2021-08-21 14:21:39 UTC 
My Netro goes offline in the middle of the night every so often, no power outages or Internet outages, so wondering what people are doing wen this occurs short of unplugging and re-plugging it in.  I am thinking of installing a smart plug to reboot it each morning so I don't miss any watering cycles.  What are people doing?
浏览: 1909   回复: 1

javier58
更新时间 2021-08-21 02:52:17 UTC 
What is the moisture range for St. Augustine grass ?
浏览: 1672   回复: 1

Insertar programss

Gaspar Morey
更新时间 2021-08-20 20:01:36 UTC 

Tengo diseñados una serie de programas de riego.. ¿Como puedo insertarlos en el día en que quiero regar? P. ej. : día 21 de agosto quiero aplicar el programa "5"


浏览: 1667   回复: 1

The app indicates that it waters and does not do it in reality

Daniel Encinas
更新时间 2021-08-18 06:17:45 UTC 
Hi all,

My problem is that in the app it appears that it is watering each area and the reality is that it either does not water at all or water less time. I have been on vacation for a few days and I have found the dry grass and two trees without leaves. A disaster. I have been communicating with the support service by email for several days and I do not have a clear answer to this problem. Can anybody help me?

Thanks a lot,

Daniel
浏览: 1948   回复: 1

% moisture

Julie Huynh
更新时间 2021-08-17 15:09:16 UTC 
How do I know what the goal % moisture is according to my plant (Agave). The app essentially tells me to water daily which seems a lot.
浏览: 2201   回复: 2

Adaptador

Roberto Baltar
更新时间 2021-08-16 05:47:49 UTC 
Hola. 

Quería saber si este adaptador es válido 

浏览: 1880   回复: 2

Sensor doesn’t work correctly

Paolo Sciarappa
更新时间 2021-08-14 20:06:25 UTC 

In the daily pie chart the temperature seems correct, but in the weekly chart the temperature is different. The same for other parameters.

The graphic is very poor.

 Any suggestion.

Thanks Paolo

浏览: 1859   回复: 1

access to data

Jose Lao
更新时间 2021-08-14 15:46:27 UTC 
话题: Netro App

How can I get (and download in csv or similar) historical daily data about spended irrigation time for each zone, it could be usefull ir order to see how to reduce the watering bill.

Thanks

Jose

浏览: 2012   回复: 1

Skip zone

the2brads
更新时间 2021-08-11 22:21:07 UTC 
We have 11 zones...I want to skip 1-3 and 7-8 an have them water every other day. I can't seem to figure it out! Unless I do it manually?
浏览: 1798   回复: 1

Google Home

Michael Wheatley
更新时间 2021-08-11 15:45:28 UTC 

I have two controllers: a Sprite with 6 zones and a Pixie faucet controller.  I would like to use Google to start and stop watering on the Pixie faucet controller.  The User Guide FAQ says:


"3. What if I have multiple controllers?

Unfortunately, Google Assistant doesn't support multiple devices. The NetroHome action controls your first Netro controller. If you have multiple Netro irrigation controllers, please try with Google Home."


How do I control the PIxie in the Google Home app?

浏览: 1893   回复: 1

Moisture

cirujanoramirez
更新时间 2021-08-11 12:38:30 UTC 
What is the lower moisture level recommended to start an irrigation ?
浏览: 1794   回复: 1

What happens to the last schedule if device is offline?

Francesco G
更新时间 2021-08-08 17:24:19 UTC 
Will stop or keep looping the schedule?
浏览: 1800   回复: 1

One zone not working

S Yarrish
更新时间 2021-08-06 00:50:19 UTC 
One zone suddenly stopped working. I can activate the zone by manually turning the solenoid. I have unplugged and restarted Netro. In the app, it shows the zone running but no water is flowing. Any ideas?
浏览: 1898   回复: 1

Weather Provider Error

Jacques
更新时间 2021-08-03 22:26:44 UTC 

I'm using the beta app. I changed my weather provider from Dark Sky to AccuWeather and now I'm trying to change it back, but am getting the attached error. Any ideas on how I can go back to Dark Sky? 

浏览: 2104   回复: 2