Hi have a standalone sensor in  a pot indoors. For the last 4 days since I have had it running its asked me to water every day. Which I have. I would like to know what the parameters for my plant are for it requesting water.

Also it shows 2% battery in the app in the day and 0% at night. The web app shows 15% all the time it seems.

Anyone have similar issues?

I am trying to figure out what the graph shows for the week. It seems like the app shows the average light for the day. Moisture present at midnight each day. And average temperature each day. Is this correct? Or is it maximum temperature for the day?

It would be nice if I could have the graph could show more than just one reading per day. It would also be nice if you could go back and see the more detailed chart for a full day after it has passed. As it is now I can only see the one data point for days that are past.

Finally for the individual days it is a bit annoying switching between am and pm. I wish there was just a graph for each day that looked like the graph for the week/month except that there was a data point for every hour. Definitely more annoying and less useful to have am and pm separate and not be able to see the changes like you can with the graph.

Thank you.

Hi, I'm the owner of a Netro 6 channel at my primary home where I use the smart watering function with no program, after 4 years I found the correct configuration and I'm really happy about the complete automation. In my vacancy home I bought a Pixie few weeks ago. I'm afraid the connection could be off when I'm not there. In the last weeks I set a program with 1 day on 5 min and the next off and the smart watering to check the rain and cancel the day raining. I would like to use the Pixie in the complete automation like in my principal home. So my question is what happen if I set only smart watering and then internet go off? Is it scheduled inside the Pixie a sort of program of watering that works anyway and the plant will receive water (even if in not an optimized way)?

Please add Foreca as weather provider! In Europe is much better than the available options on the app. Metro group is also a good option for your European customers like me.

Thank you

Hi! I just installed my brand new whisperer, and I’m wondering which value I should configure for the skip watering functionality (80% by default). I have the perception that is too high for a Bermuda lawn.

Thank you!

We are selling our house. How do we transfer the current sprite to the new owners without resetting all the settings?

Salve a tutti, come da titolo la app durante la configurazione con smartphone in questo caso un IPHONE 7 PLUS con iOS 14.4 non riesce a completare l’accoppiamento con Netro , ho riprovato con smartphone Android con successo.

Ho fatto presente l’anomalia anche all’azienda costruttrice, la quale ci sta lavorando.

Chiedo a qualcuno di voi se ha avuto lo stesso problema.

Good morning

I have received two days ago my new sensor. I am not able to start the sensor to proceed with the installation.  

When I press the power button it makes a short flash in red after releasing but does not turn to white , blink or green.  

Same effect when I press quickly  three times or six times.   It only produces a short flash in red.  I can not proceed with the installation as my app does not find the Netro wifi of the sensor as it is off.    I tried to leave the sensor under solar exposure for a full day with no change in the behavior.  Still just a short red flash after pressing the power button but nothing else.

Can you guide me how to solve the problem? 

We have installed Netro Sprite system yesterday

we like the Netro app to manage the programs.

My question is this: How do i add additional members of the house the same access to manage the programs ?, such as altering zone level scheduling etc.

Hey Team,

Have one zone that is connected to drippers in an undercover area with hanging baskets

Need to set a regular schedule for watering in this area, that ignores restrictions for this area, but still applies for other zones. 

Is this available in the app at the moment?

Hello I would like to know how many electro valves I can open at the same time?

Thanks

Regards 

After the numerous power outages in Dallas last week, my sprinklers attempted to run this morning.   At its scheduled time, the zone shows "loading" but - no water.   ???

explicit instructions on how to add weather station weather station, namely weatherunderground personal weather station. How do you add station ID

Thanks

Hi, i would appreciate if someone could help me. I need to link the netro to the router without password, however the procedure need a password in any case: how can I do? Thanks for the support 

Hi, I will apreciate if someone can help me, I'm going crazy, becouse suddenly, one of the solenoid valve stopped after 10 seconds. But the app show that it is running. I changed the valve with a new one, but same 7-8 seconds after run, it stoppes. Pls help me! Thanks

hello,

I installed my nero sprite-12 2 months ago. Today , finally, I connected my 6 valves and the C cable to the Nero. Then, I tried to watering the first one (doing play bottom) but the valve does not work. I put 24v int he valve directl and it started watering. Then, I check with a multimeter the output for the valve in the nero controller and It was 0v.

Then, I delet the controller in the app and tried to reset the Nero sprit but I doesnt do anything. I hold the rst button during 8 or more second  several times but the led stills keep lighting and no wifi radiated to connect. 

¿How Can I solve this issue?   

APP version 2.5.3

Can I turn Netro off on the app ?

How does the algorithm work?   Specifically how far into the future do it look at the weather forecast?   Is this limited to just the next day or can this be adjusted to look beyond tomorrow.    Using the smart system, my sprinklers came on this morning, even though the forecast calls for a 70% chance of 1 inch of rain in 2 days.    If I were controlling the system, I would not have watered, given the price we pay for water.

Is it possible to change the date format?  seems to be in US format no matter what i put in the preferences. i.e i would like 21st December to be 21/12/2021

I’m having problems with the runs zone one don’t go on and the other ones go on twice a day I’m trying to reset but I don’t know how thank you