I reset my netro sprite as work was being done on my sprinkler system.  It came back on slow blink.  I have not been able to reconnect to my internet.  when setting up netro shows up on my phone with good wifi connection, but will not connect. I have turned data off and still not luck. I have unplugged Netro sprite and still no luck. If anyone has any ideas please share.

My Netro goes offline in the middle of the night every so often, no power outages or Internet outages, so wondering what people are doing wen this occurs short of unplugging and re-plugging it in.  I am thinking of installing a smart plug to reboot it each morning so I don't miss any watering cycles.  What are people doing?

What is the moisture range for St. Augustine grass ?

Tengo diseñados una serie de programas de riego.. ¿Como puedo insertarlos en el día en que quiero regar? P. ej. : día 21 de agosto quiero aplicar el programa "5"

Hi all,

My problem is that in the app it appears that it is watering each area and the reality is that it either does not water at all or water less time. I have been on vacation for a few days and I have found the dry grass and two trees without leaves. A disaster. I have been communicating with the support service by email for several days and I do not have a clear answer to this problem. Can anybody help me?

Thanks a lot,

Daniel

How do I know what the goal % moisture is according to my plant (Agave). The app essentially tells me to water daily which seems a lot.

Hola. 

Quería saber si este adaptador es válido 

In the daily pie chart the temperature seems correct, but in the weekly chart the temperature is different. The same for other parameters.

The graphic is very poor.

 Any suggestion.

Thanks Paolo

How can I get (and download in csv or similar) historical daily data about spended irrigation time for each zone, it could be usefull ir order to see how to reduce the watering bill.

Thanks

Jose

We have 11 zones...I want to skip 1-3 and 7-8 an have them water every other day. I can't seem to figure it out! Unless I do it manually?

I have two controllers: a Sprite with 6 zones and a Pixie faucet controller.  I would like to use Google to start and stop watering on the Pixie faucet controller.  The User Guide FAQ says:

"3. What if I have multiple controllers?

Unfortunately, Google Assistant doesn't support multiple devices. The NetroHome action controls your first Netro controller. If you have multiple Netro irrigation controllers, please try with Google Home."

How do I control the PIxie in the Google Home app?

What is the lower moisture level recommended to start an irrigation ?

Will stop or keep looping the schedule?

One zone suddenly stopped working. I can activate the zone by manually turning the solenoid. I have unplugged and restarted Netro. In the app, it shows the zone running but no water is flowing. Any ideas?

I'm using the beta app. I changed my weather provider from Dark Sky to AccuWeather and now I'm trying to change it back, but am getting the attached error. Any ideas on how I can go back to Dark Sky? 

I am confused. I have a program setup for zone 1-5 to start water starting at 9:00am on Tuesdays. I looked at the Home Screen today and it shows the next Watering for each zone to be like: Zone 1=8 Hours, Zone 2=11 Hours, Zone 3=11 Hours, Zone 4=7 Hours, Zone 5=8 Hours. 

It’s 10:30pm on Monday night now. Why are the times shown different? I want Zone 1 to start at 9:00, Zone 2 to start when Zone 1 finishes, Zone 3 when Zone 2 finishes... why are these times all over the map?

For some reason the pixie is stuck in the on position. I cant turn off the water 

Dear Netro,

Although you have provided a lot of data via the api. And for all of you who wanted to get data out to your smart hub, it's there for the grabs ! 

ONE DOWNSIDE, i would have expected the battery data of the plant sensor to be provided for the start and potentially the state of the sensor. Although that you could potentially use the last update, to deduct this. When can we expect this to get updated ? 

Buenos días hace una semana que instalé Netro 12  estaciones

He perdido la señal wifi en tres ocasiones. He observado que para que vuelva a estar en línea debo desconectar de la corriente eléctrica y volver a conectar el programador,. Me gustaría saber si esta es la manera normal de proceder.

Por otro lado también he observado que si esta fuera de Línea, no riega el jardín lo  que  supone  un problema, pues el programador no lo tengo en mi vivienda habitual.

De que manera puedo resolver estos dos problemas.

Un saludo

Hi 

i received Netro programmer

no connection

i have a fritbox 7560 

the server status message says

mqtt blocked port 1883