Más filtros

Multiple Pixies?

J Forrest
Actualizado 2021-04-17 03:33:18 UTC 

Can multiple pixies be controlled through the app as different zones?  Can they run sequentially - i.e. manually run all zones for 15 minutes one after the other?  Is a controller required for any of that?


Thanks

Ver: 1899   Respuesta: 1

How to delete a device

Carles
Actualizado 2021-04-16 12:33:31 UTC 

I wanted to add a whisper sensor to my existing system.  I accidentally added it as a new device.  I did eventually add the new whisper sensor to my original device.  The issue is I now have two devices in the app.  The first is a device named Ros Reg that has my two whisper sensors attached and a second device named Sensor de planta with nothing attached to it. I want to delete the device  named Sensor de planta.  I cannot find a way to delete it.

T'he third device is named Ros Gotero


Ver: 2004   Respuesta: 1

Time zone not supported

Havre de Grace
Actualizado 2021-04-15 08:11:30 UTC 

I keep getting this error when I try to put my address in Jersey, Channel Islands. 
Ver: 1801   Respuesta: 1

Manual start on demand

Krzysztof Wiater
Actualizado 2021-04-14 03:34:58 UTC 
Tema: General

Hi.

I just got unit garden hose pixie unit. I am looking for a manual watering on demand button. I want to be able to turn it on and off an needed. Right now i see I have to wait 1 hr or so to turn it on. Am I missing something here? Please help. Thanks in advance. 

Ver: 2062   Respuesta: 1

How to Set Schedule?

tonycurry
Actualizado 2021-04-14 02:13:12 UTC 
I created a schedule under settings, programs and indicated a start date. When I go to “schedule” I do not see the program j created on the calendar. Please help. 
Ver: 2022   Respuesta: 1

Zone not watering keep loading

Fabio Pellizzoni
Actualizado 2021-04-13 20:10:43 UTC 

Hi

It happened recently that the app shown "online" and  i tried to start one zone  but didn t  work. the count down start but the message loading keep showing and the zone never actually start

Do you have any idea why ?

Thanks 

Ver: 1967   Respuesta: 1

My sprinklers keep watering beyond the timer

Tony Pellegrino
Actualizado 2021-04-13 19:14:36 UTC 

Why does my sprinklers keep watering after the timer has expired.

Ver: 1991   Respuesta: 1

Notifications

Imran Ali
Actualizado 2021-04-12 22:54:05 UTC 

Hi,

Is there a way for the App to notify me once irrigation has started or stopped? 


Thank you.

Regards,

Imran Ali 

Ver: 2023   Respuesta: 1

Timezone not supported

Shai Amiel
Actualizado 2021-04-11 19:33:24 UTC 
why do i get this error? I am trying to install in israel
Ver: 2041   Respuesta: 1

How to delete a device

Scott Gustafson
Actualizado 2021-04-10 16:04:18 UTC 
I wanted to add a whisper sensor to my existing system.  I accidentally added it as a new device.  I did eventually add the new whisper sensor to my original device.  The issue is I now have two devices in the app.  The first is a device named Sprinkle that has my three whisper sensors attached and a second device named Plant Sensor with nothing attached to it. I want to delete the device  named Plant Sensor.  I cannot find a way to delete it.  

Thanks,

Scott

Ver: 2076   Respuesta: 1

Disable a zone

fernando colon
Actualizado 2021-04-10 14:15:21 UTC 
Ive been trying to remove/disable a zone however the app is not allowing me to do so.  Is there an alternatuve method?
Ver: 2953   Respuesta: 1

Moisture Level

Des Mullin
Actualizado 2021-04-09 23:48:09 UTC 
Due to external factors on our property it would be very useful to be able to set the current moisture level for a zone. Is there a way to do this ?
Ver: 2098   Respuesta: 1

Adding multiple sensors to a Pixie

phatd
Actualizado 2021-04-09 18:13:11 UTC 
Tema: General
I have a mister setup with multiple Herb racks and raised garden beds. I just got a Pixie and a few Whispers. My hope was using one Pixie and monitoring each bed with a whisper. Is this possible? Can I create multiple zones? Is this something going forward that might be possible? I don't want to set them up as standalones.
Ver: 1927   Respuesta: 1

How often should I water reseed

Abel Vargas
Actualizado 2021-04-09 00:49:42 UTC 
I am currently located in New Jersey. I just reseeded my back yard and lawn on Monday. How often should I water them and what times would you recommend 
Ver: 3167   Respuesta: 1

How do I cancel a watering schedule while we make sprinkler repairs?

David Farries
Actualizado 2021-04-07 02:16:14 UTC 
How do I cancel a watering schedule while we make sprinkler repairs?
Ver: 1992   Respuesta: 1

is there a firmware update that i can apply?

jjmengibar
Actualizado 2021-04-05 18:19:11 UTC 
Zones 12 Serial number E4956E4B65BD Hardware version 1.2 Firmware version 1.1.3 Last active 2021/04/05 20:11
Ver: 2105   Respuesta: 1

Netro Doesn't respect watering hours in smart mode

jjmengibar
Actualizado 2021-04-05 18:16:46 UTC 

Doesn't respect watering hours in smart mode.

The time of the zones has only been changed and it cannot be reset and it is watering every 5 minutes.

How can I reset any zone


Ver: 2092   Respuesta: 1

Can’t start Netro

Joe Horner
Actualizado 2021-04-05 14:47:49 UTC 
After 4 months of non use over winter, I cannot restart my Netro system 

1 sec  blinking of light and have pressed reset button but still get  message “off line” and blinking persists.  

I have a good WiFi signal. 

Ver: 1937   Respuesta: 1

Does the Pixle have to be installed with the water coming into it on the "Hose Faucet Connection" side?

dad@darkroom.ai
Actualizado 2021-04-03 19:04:13 UTC 

Basically, is the Pixie water control valve one way, or can it shut off/turn on with pressure from either side?  In order to install it so the button faces up, I need to install it so the water comes in what is labeled as the "Outlet" side.  I don't know if it's labeled "Outlet" because it is a male connection, or because it cares about the direction of the water.  Otherwise, I will need to buy a male/male and female/female adapter, flip it "upside down" and use it with the button facing down.


Thanks.


Ver: 1928   Respuesta: 1

Many inexplicable Manual runs

Panos Charalambopoulos
Actualizado 2021-04-03 11:37:15 UTC 

Hello everyone ,


During the last hour or so my netro spark has been doing these inexplicable Manual runs. They start and stop on their own without any manual input . Any ideas ?


Ver: 2054   Respuesta: 1