Más filtros

Soil moisture adjustment

Kyle Giacomini
Actualizado 2023-09-12 01:34:23 UTC 
Is there a way to manually adjust the soil moisture levels? For example, I have a zone that is reading as saturated (above 80). However the irrigation in that zone has not been connected prior. It would be useful in the app to be have the user adjust soil moisture levels manually to help with issues like this in the future. I do not have any soil moisture probes installed so the moisture levels are being automaticaly calculated by the smart watering algorithm. 
Ver: 1584   Respuesta: 1

Whisperer stake cracked

Carolyn Seyfried
Actualizado 2023-09-09 20:22:46 UTC 
Whisperer stake cracked when lawnmower hit it. Can it be fixed?
Ver: 1536   Respuesta: 1

Arghhh, so horrible

Jake Tanner
Actualizado 2023-09-09 16:24:29 UTC 
Need manual run to be immediate... obviously. What prevents this?how to overcome.akes trouble shooting horrible 
Ver: 1491   Respuesta: 1

Irrigreen sprinklers

Alfonso Olias Sanz
Actualizado 2023-09-09 08:34:33 UTC 

This would be a supper nice feature to add to NETRO. 

Combining with the whisperers

https://irrigreen.com/

Ver: 1787   Comentario: 0

Parallel Run of watering

C He
Actualizado 2023-09-08 08:39:13 UTC 

Hallo and short question: 


I can not find any option to water more than one zone in the same time. Ist this not possible? 


@Netro team: in case the feature is not available at the moment i would appreciate your development 

Ver: 1542   Respuesta: 2

smart watering

Diane Fetherolf
Actualizado 2023-09-04 22:29:30 UTC 
How do I turn off smarr wartering?
Ver: 1353   Respuesta: 1

Watering by moisture level higher 90%

C He
Actualizado 2023-09-04 06:22:44 UTC 

Hi, 


Netro will water my garten when the Whisperer sensors show 92% moisture level. 


This is smart watering? 


I think, there is no water needed or I’m wrong?




Ver: 1520   Respuesta: 1

Zones water at for a small amount of time.

Jacob Matheny
Actualizado 2023-09-01 13:44:37 UTC 
I’m currently using my Netro spark 16 to water a 1 1/2 acre field of grass. There are a couple zones that are repeatedly watering for just a few seconds or a couple minutes when they are supposed to be watering for 6 to 10 minutes. It is causing a very big issue in the field. There are a large bare spots that are directly around the problematic zones. Is there any fix to this? I need answers ASAP.
Ver: 1529   Respuesta: 1

PIXIE-1 Low pressure IN - gravity irrigation systems don't Work

Leandro
Actualizado 2023-08-31 10:48:12 UTC 
HI Support Team and All,

I purchased the smart valve (PIXIE-1)  and the sensor (WHISPERER-2) for my vegetable garden, but unfortunately the pixie-1 releases a few drops of water when it is in irrigation mode, my watering system is ecological, I collect rainwater, 

because the pixie-1 does not it passes water with little pressure, the pressure is low but sufficient for irrigation.

This wasn't written anywhere.

Is it possible to configure the valve to use it with low pressure?
thank you all

Leandro

Ver: 1538   Respuesta: 2

Whisperer sensor already in account error

Scott Yates
Actualizado 2023-08-29 12:38:49 UTC 
I had previously installed a Whisperer sensor and then removed it from the app.  I factory reset the Whisperer 3x successfully.  When I try to re-install it again, I go through the setup process and at the end, I receive a "Sensor xxxx already in your account".  I have gone to the app and website to see if the sensor is listed but it is not.  Any suggestions on how to fix this issue would be sincerely appreciated.
Ver: 1597   Respuesta: 1

Sensor offline

Tonycimo
Actualizado 2023-08-28 21:29:20 UTC 

Hello 

Actually i have 3 sensors in my garden and 2 are properly seitched on instead one randomically switched off and i see it because there is no data in statistics


How csn i solve it? 

Czn i check snything?


Thanks

Ver: 1427   Respuesta: 1

Please issue a good manual.

Mark Menzhausen
Actualizado 2023-08-27 15:04:55 UTC 
Tema: General


Ver: 1964   Comentario: 1

Addind more than 3 Users?

scgrossengersdorf
Actualizado 2023-08-27 11:07:02 UTC 

Hello everyone,


Is it possible to set up more than 3 users in the user administration or are there plans to increase this number?

Best regards
WH
Ver: 1409   Respuesta: 1

Not connecting

Ali M
Actualizado 2023-08-27 05:07:14 UTC 
Won't connect to the internet. Tried all day
Ver: 1392   Respuesta: 1

Se cierran electroválvulas y deja de regar

Xavi
Actualizado 2023-08-25 21:23:22 UTC 
Hello! For a few days the watering has stopped in the middle of the program, although in the app it tells me that it is watering. Sometimes I try to irrigate manually and the irrigation does not connect either, but in the app it tells me that it is watering.
Ver: 1315   Respuesta: 0

Sprinkler Type for Soaker Hose

TJ Wasik
Actualizado 2023-08-23 18:57:57 UTC 

I am using 1/4 inch soaker hose for my netro controlled irrigation system, yet that is not an option in the "sprinkler type" selection box. What Sprinkler Type should I choose as an equivalent? Are there any plans to add Soaker Hose as an option in a future update?


I have small lengths of soaker hose encircling the base of each of my 20 bushes with lengths of standard hose running between them. for a total lengh of 50 feet of soaker hose.

Ver: 1427   Respuesta: 1

Bluetooth cannot find my Spark

Jacob Matheny
Actualizado 2023-08-22 15:15:10 UTC 
Hello I’m currently trying to connect my spark 16 controller to my Wi-Fi network. In the Quickstart guide it is asking me to enable my Bluetooth and find the device that way. I’ve done so and it is not popping up. I tried connecting it via Wi-Fi, and it would not work as well. if I can, please get a solution quickly if that would be great. My grass field is currently not getting water.
Ver: 1401   Respuesta: 1

Bluetooth cannot find my Spark

Jacob Matheny
Actualizado 2023-08-22 15:14:09 UTC 
Hello I’m currently trying to connect my spark 16 controller to my Wi-Fi network. In the Quickstart guide it is asking me to enable my Bluetooth and find the device that way. I’ve done so and it is not popping up. I tried connecting it via Wi-Fi, and it would not work as well. if I can, please get a solution quickly if that would be great. My grass field is currently not getting water.
Ver: 1388   Respuesta: 0

Ventiles are not closed from spark - not smart watering

C He
Actualizado 2023-08-17 05:23:52 UTC 

Hello Netro Support, 


The Spark startet watering today at 4 am as it was calculated by whisperer and weather. 3 Zones got water, but instead of watering 10 minutes the gras got 3 hours water. 

I wasted a lot of water, this is far away of smart watering. My old installation from Gardena / Husquarna never had such problem. 


The spark was not able to close the Ventils! 


The only way was the make the spark powerless. 


What’s wrong? 


Again: the test procedure of the ventiles works without any problem, spark open AND CLOSE every ventile step by step! 



 

Ver: 1510   Respuesta: 2

Moisture to skip watering

Maurizio Gianesin
Actualizado 2023-08-15 19:55:07 UTC 
Is there any reason for which Moisture to skip watering cannot be less than 50% ? 
I appreciate any answer . 
Many thanks
Ver: 1432   Respuesta: 1