Hi,

Any chance of adding a valve/solenoid finder feature? This would work similar to products like Chatterbox. The selected station for valve finding would switch the valve on and off quickly so that the rattle/chatter sound it makes can be used to find it. The main valve could be left closed.

Thanks

Hi I bought and installed a Netro Sprite6 watering controller about a year ago. Would really appreciate having notifications enabled for all watering activities. I had a good look through the app features and can’t find anyway to enable it. Could someone help please?

Is there a version of the app that runs on a Windows PC or a Raspberry Pi?

I run all my home automation on a dedicated Raspberry Pi so it would be nice to keep everything in one place.

Is there a way to give info to the app to dial in the soil moisture level?   I would like to measure soil moisture and input the info to my controller and the controller should adjust watering schedule. How about reminding user to check moisture level once in a while and input the info. Is this a thing? 

Thanks!

John

The whisperer sensor combined with the app seems confused. The app tells me to water every day however the sensor tells me a date on when to water next that is usually 8+ days later. 

I would.love to have the app inform me when watering starts and stops. Is there a way to do it?

I have one particular zone that i only require watering for 15 seconds every second day.

How can i do this?  i was able to do it on my previous OpenSprinkler.

Sistemato 

This morning we noticed that my Sprite light was flashing. I tried to get into the app and it kept saying network error. I booted the Sprite, I booted my router, and the light is no longer flashing. 

But when I try to log into the app now it says network error. I logged into metrohome.com and my Sprite was able to work from naturalhome.com, but I am still not able to log in to the app. I use the same login at netrohome.com as I did with my app.

Way Netro had changed my user password?

Good morning, I installed a Sprite 6 controller, it works perfectly, but I have three questions: 1. How do I change the irrigation percentage without changing the watering minutes for all the zones each time? 2. When rain or wind is forecast, does the irrigation program still skip even if the smart function is not enabled? 3. When I start a zone in manual mode, for example to control the sprinklers, is it normal for there to be a long delay between pressing the Stop button and the actual interruption? Thanks.

My system is connected to a 500 liter tank. If I turn on both zones, it empties in 13 minutes.

In the application there is no possibility to program the maximum irrigation time for each individual area. I want you to work at most 13 minutes!

Hi, I have a Sprite 12 zones and a Whisperer 2 sensor added to the Netro app. However I cannot find any way to setup the sensor so that it inhibits watering if the measured humidity is higher than some value. The sensor is sending correct reading to the app but now it has been raining for few days and the Sprite keeps watering.

I would like to disable watering based on the sensor only and not on the weather forecast.

If in the app I select the Sprite, then go to settings>zones and select one zone i see the setting Sensor as "Not connected" but there is no way to connect a sensor. If i select the sensor and go to settings>sensor I see all the settings to change name, light color data send interval, but nothing about rain.

Can someone please help me? Thank you!

Hi everyone,

I'm experiencing a serious issue with my Netro Sprite 6 controller. It connects correctly to Wi-Fi and appears online in the app, but when I try to start irrigation manually, the app just stays on "in communication" and nothing happens.

Here’s what I’ve already tried:

- Restarting both the app and the device  
- Using a different Wi-Fi network, including a mobile hotspot  

Despite these attempts, the problem persists.

Thenks

Can you change the order of zones in a current program without having to create a new program?

My whisperer used outdoor gave me an alert here thru the Netro app saying it has 19% battery remaining. What does it mean? Is the solar no longer working? Is there another way to recharge it or can the rechargeable battery be replaced?

Thank you

When pausing a zone for any reason during watering cycle, the zone is skipped. Is there any way to pause it then resume the watering cycle in the zone that was paused?

Good afternoon,

How could I get The Netro app user’s manual?

I woukd like to understand all the concepts, parámeters and  options in the app

Thais in advance

Hello,

After the winter only one of my three sensors shows in the app.  (Twisty Baby Locust).  The other two do not, and when trying to add back in the app errors out as they are already associated with my account....how do I find them and get them back?  I have charges both to ensure good power, and waited multiple day for them to sync, but still missing.

Thanks

Dan

Hello,

Zone 4 out of my nine zones will only run when I manually  turn the  controller valve  in the box in the ground, and not from my metro sprite app. I tried removing and inserting the zone 4 wire in the Netro slot , but still no luck . All the other zones will run from the app except zone 4. Please help.