Dear customer,

Yes a Whisperersensor can be assigned a zone. In this case, the Sprite can utilize the data from the Whisperer to optimize the watering schedule.

Thanks

Wency

Netro Support

Dear customer,

You can reset the unit to start over. The RST button is located underneath cover and is next to the AC adapter wiring slots. It is marked RST. Please hold down on the reset button for 6-8 seconds and then wait for 1-2 minutes. The light on the Sprite unit should then start blinking slowly and then follow the steps on the app accordingly.

Thanks,

Netro Support

Dear customer,

Yes you can go to Settings->Programs to edit the watering duration and start time.

Thanks,

Netro Support

Dear customer,

We have also received your email and will get back to you soon.

Thanks,

Wency

Netro Support

Dear customer,

If you turn on the smart zone feature, Netro will skip the schedules(including manual schedules from user programs) when there is a chance of significant rain(>0.2inch).

For rain expectation, it uses the amount of rainfall multiplied by the probability of the rainfall to compare with the threshold. If the result is 0.2 inches or higher, than we will cancel watering schedules. For example, if rainfall is 0.2 inches but the probability is 50%, then 0.2*.5 = .1, 0.1 is less than 0.2, so the watering will go as scheduled. But if rainfall is 0.4 inches with 50%, then the Smart Zone will cancel the watering schedule for that day.

Thanks,

Wency

Netro Support

Dear customer,

Could you please change the WiFi channel from your WiFi router? Use a personal hotspot to test whether the connection issue is with the Netro device or your WiFi system.

Please let us know if it works.

Thanks,

Wency

Netro Support

Dear customer,

Currently, Netro does not provide support for this feature, so you will need to set it manually.

Thanks,

Wency

Netro Support

Hi David,

We do not support opening the water valve for a long time at the moment. Currently, our maximum watering time is 1 hour.

If you have any further concerns or questions, please do not hesitate to reach out to us. 
 
Regards, 

Wency
Netro Support

Dear customer,

We understand that in many countries, flow rates are often measured in volume per minute, while our app requires this data in inches per hour. Therefore, we convert volume per minute into the values our app needs, taking into account the area covered by the soil and its depth affected. In future versions, we plan to include a conversion formula within the app for clarity and convenience.

Thanks

Wency

Netro Support

Dear customer,

I apologize for the inconvenience. This issue was due to a bug on our server and we have fixed this usse. Your scheduling should be functioning correctly now.

Thanks,

Wency

Netro Support

Dear customer,

We have also received your email and we will get back to you soon.

Thanks,

Wency

Netro Support

Dear customer,

We will support this feature in our next release. Thank you for your suggestion.

Thanks.

Wency

Netro Support

Dear customer,

Are you using Pixie-1 timer? By default, your Pixie turns on its WiFi module once every hour to sync up with the server. The sync-up usually takes less than one minute. For the next 59 minutes the timer will be sleeping and disconnected from the WiFi until the next sync. When the timer is sleeping, it is unaware of the schedule changes, including the manual watering.

If you have to water instantly, you can go to Settings -> Preferences-> "Keep Online" and enable the feature.

You can view more info here: https://netrohome.com/en/shop/user_guides/2

Thanks,

Wency
Netro Support

Dear customer,

Currently Netro can only run one zone at a time, so different zones for the same time cannot be created. 

Thanks,

Wency

Netro Support

Dear customer,

 92% moisture level means there won't be any watering scheduled. If you see a watering schedule set for two to three days later, it's normal. This schedule is estimated based on the humidity. If the humidity is higher than the set threshold on that day, Netro will adjust the watering accordingly.

Thanks,

Wency

Netro Support

Dear customer,

You can go to Settings->Zones->Smart Zone (Settings->Garden->Smart Zone for Pixie Timer) and toggle the enable button. When the smart zone is disabled, the system will strictly follow the user program to water the zones. There is no intelligence here. Netro will not skip your schedules when there is rain. Regulation feature will not be in effect as well.

Thanks,

Wency

Netro Support

Dear customer,

Please check the wires. Are they loose or disconnected from the slots? Please also check the common wires and the master valve if you have one. If you believe the wires are correctly installed,  please check if there is a main valve/faucet that is turned off manually. 

To test if the controller is working properly, use a multimeter (AC voltage mode) to test the voltage between the common wire and the zone wire when the zone is active. Normally the voltage should be between 24V and 28V.

You might also want to check whether there are shorted zones or open zones. You just need to use a multimeter to measure the resistance between the common wire and each zone (remove the wires from the slots before testing the resistance). The normal reading would be 20-60 Ohms. If the reading is less than 10 Ohms then you might have a shorted circuit in the solenoid and if it is larger than 80 Ohms you might have an open circuit. 

Thanks.

Wency

Netro Support

Dear customer,

Sorry, the PIXIE-1 timer requires a water source with sufficient pressure, either from tap water or a pressurized water source. In your case, the water pressure is low, it might not be suitable for the PIXIE-1 timer. You might consider using a drip irrigation system. If you have any further questions or concerns, please don't hesitate to reach out to us.

Thanks,

Wency

Netro Support

Dear customer,

Could you please send us email to support@netrohome.com with your Netro account registered email?

We will have our technician look into this issue. Could you please let us know how many sensors you have? We would like to confirm if the sensor you deleted is the same one you are currently using.

Thanks,

Wency

Netro Support

Dear customer,

Could you please send us email to support@netrohome.com with your Netro account registered email?
We will have our technician look into this issue. 

Thanks
Wency
Netro Support