I was told the custom schedule would not let my moisture level go below the min I set but it goes below the min all the time

Hi today the smart schedule wateres while sensors above the 50% humid. I stopped manually. It is weird because the schedule shows to skip the zone but it watered anyway. Zone 3 and zone 4. Zone 1 is correct

May you check it?

Can you guys add weather station

KVACHEST132

We had enabled Smart Watering. It was watering each zone twice, for a very long time - totalling up to 2 hours nearly daily, unless it was raining. I know the standard comment from Netro CS is that it's better to water deeply and less frequently, but this was watering every day...2 hours a day. It's too much. I disabled smart watering, and created my own program, but it 1) doesn't show up in the calendar/schedule and 2) the home page says "Next run not scheduled". How do I enable my custom program to run? Is there some small enable/disable button somewhere I need to use? Do I need to clear everything and start from scratch? We'd love a nice green lawn, but can't water for 2 hours every day (on just a small front yard!). 

Also, it'd be nice if there was a way to talk to a technician. Thank you.

Anyone running into an issue of having two zones run at the same time when doing a manual run?

Hello,

I was wondering if it's possible and makes sense to connect more than one rain sensor to the Netro Sprite.

My unit has been working great . However, the relay no longer trips when a zone is activated. Am I supposed to have 24v A/C between M and C (on the right side of the panel, not the zone side) when a zone is active? I can trip the relay if I pull it from the Netro. Some sort of voltage output map would be helpful. 

So has anyone else have random sprinklers turn on even though there is no program active for the sprinkler?

I had to turn off most of my programs because I have to reduce my sprinkler heads. And now I’m getting random sprinklers coming on.

How to delete a schedule on my watering system.

Hi and thanks for fixing my last bug.

Another problem I have is with IFTTT being out of sync with my Pixie, eg, I schedule the Pixie to operate between 4:30 am and 4:45 am but IFTTT, whichI use to switch on the pump, reports it active between 4:43 to 5:24 am.

The consequence is that I only get 2 minutes of water as the Pixie has already stopped the flow by the time IFTTT turns the pump on.

Please advise.

Hi

I have been using this Netro Pixie for one and half month. It is actually my second Pixie. The first one arrived broken as the valve was not opening properly for watering, I could hear a "hiisss" sound like air spraying.

The second pixie arrived and I have used it for one and half month, very reliable and I love the fact that it has the photovoltaic cell.

Yet, yesterday I uninstalled it as I do not need it anymore till next spring and... in spite of opening the valve and turning it upside down to empty it, I could still hear noice of water inside the device. I opened the battery compartment and... there was water inside... lots of water... actually as soon as I turned it upside down and shaken it, it went for a reboot.

How is it possible that there was water inside??? I have been using watering timers for fifteen years from brands like Gardenia and never ever had this issue. Isn't it supposed to be a sealed device?

I am sure it won't work next spring...

Anybody else has had this issue?

Thanks

I do not know if it happened before, I noticed it today with yesterday's irrigations.

The report from the Netro app (iOS) says that 2 of the 5 planned waterings failed (BTW, why , for which technical reason ?)

The report from the web interface says that 3 of the 5 planned waterings failed (BTW , why, same question above)

I set up a IFTTT applet to receive a notification after every successful watering and according to that 5 to 5 waterings were OK.

I do not post screenshots from IFTT as they are 5, but of course they are available for digging if anybody from netro needs them.

Please help me:

1.  what should I trust ?
2. based on which  result (app or web) did the scheduler react for today's waterings ? I suppose on web, because I got today exactly the three waterings that "failed" yesterday according to web report.

Thank you.

APP:

WEB:

I have recently found that my Netro APP locks-up waiting for my Pixie to respond while trying to set the schedule or even just entering the home screen.

It is locked-up at the moment (29/08/22 09:39).

I have deleted the APP and relaunched it but still get the problem.

I am running 15.6.1 on my iPhone SE and iPad.

Please advise.

How can I set up watering schedule manually, I mean I decided how many minutes daily each zone I want to water?

What soil category is closet to chalk in the settings 

Many thanks in advance

How can I get station id 

KMTJOLIE28

Added to my controller 

Is there a published list online of Wunderground station IDs supported by Netro? Specifically, I'm looking for Hawk Ridge - KCOCOLOR1090

Thanks!

I bought a Netro Spark to replace an existing controller (a Raspberry pi based Open Sprinkler system) which exploded probably due to a shorted solenoid.

I read that the Spark can detect solenoids that are drawing too much current; is it safe to connect the Spark to shorted solenoids without worrying about damage to the controller?

Should I test all the solenoids with an amp meter first just to make sure?

I touch the “done with zone” by mistake now I can’t figure out how to add the rest. 

I have a netro sprite.  I live in Dallas.  My lawn as drought tolerant bermuda grass.  The grass can easily get by with 10 minutes of watering once a week.  When I look at the logs I see that the sprite is watering the each zone 5 to 15 minutes a day.  I enabled water regulations which  restricted water to Wednesday and Saturday.  Even with this change, the schedule still says 14 to 18 minutes of watering for each zone on the watering days.  I do not have a whisperer

My settings :

grass type:: warm season grass

soil type: clay

sprinkler type: rotor head

shade: none or some shade

smart zone: enabled (Level=advance, mode=eco)

area = 1000 sq ft (I tried reducing this value but then the estimates under "smart zone" go to zero)