Do you know how we can  change the location.

En el Spark aparece la zona de riego (05) y en el tiempo aparece (E2) y la zona no riega, ¿me pueden indicar que signfica la E2?. Gracias

Hi there, 

I'm currently using the smart watering feature on all my zones. However, I have a few zones with turf that are on a slope. It seems like the smart watering feature uses long duration watering sets (more than 25 minutes) that's causing unwanted runoff. Also, since I'm on a well, the longer irrigation sets really taxes my water pressure. My pressure drops after 13 minutes or so making the spray pattern uneavenly distributed with less water and also changing the application rates. Having shorter duration irrigation would help my well recharge and maintain pressure during the irrigation.  Is there a way to minimize the duration or set a max duration irrigation setting for a group of zones so I don't continue sending water down the road? Ideally, having many shorter sets rather than one long set would be helpful, a cycle and soak approach. Thank you! 

I want to be able to manually turn on one zone without having a I create a schedule to do so. Turn on and turn off. It would be great if I could do this from the screen with the pics uploaded. 

I am a Rachio guy but love the sensors by Netro. I’m trying to figure out how to set my watering recommendations from Netro with Rachio. What I’m lacking is ability to set my zones up and amount of water flow from different head types. How can I do this with Netro?

I cannot "Edit" an existing schedule!? I wish I didn't have to delete my account and start the installation all over again!!! 

And after putting the new schedule data, the programming went bezerk! I've capture the weirdest program that was injected by Netro, not me!  

I've taken the snap shots of the wired vs good program off of my screen, but cannot share these images here!?

Hello, the metro app does not work well, it closes when I check the weekly status in the following menu. 

my phone is samsung A32 ,Android version 12.

I have just installed a 12 zone Sprite controller and am definitely not impressed.  Over waters, in my experience.  So I've turned off the fully autonomous "smart" part and am trying to set up "basic" watering schedules like the old days.

I have been installing residential sprinkler systems since the 1970s and this little controller has me flummoxed.

What would help is a detailed operator's manual to help explain icons and features.  I've looked for one online and to no avail, can't find anything.

Here's one for example...  I want to remotely turn on one zone for a set amount of time, either for testing or additional watering.

Any help would be greatly appreciated.

Hi all.

Do tou know how much time  "autolearnig" function needs to be completed? 

Best regards, 

Angel

Hey All!

I have a Netro sprite. I want to water my grass everyday unless it rained or is going to rain. It rained something crazy last night and yet it still watered this morning. What am I missing? 

Also I hit rain delay earlier and hit done showing a 5 day delay, how do I change that once I hit it. It still shows the next watering is in 5 days. 

I’m pretty good with computers and apps but this one isn’t easy for me to wrap my head around. Things just don’t seem to be easy to make things happen. IMHO! 

Thanks. 

Buenos días desde España

Hay alguna solución para esto?

Mil gracias 

To the Netro community:

We are excited to introduce our new products, the Netro Zigbee Hub and the new smart timer Pixie-Z1. They combined deliver a different experience of smart watering system. 

The Netro Zigbee Hub hosts a long-range local Zigbee network that links all the end devices. It connects to your router (wireless or wired) to transfer data between the end devices and the Netro cloud service. The Hub will work with all our Zigbee products including the new timer Pixie-Z1(introduced below) and the new soil moisture sensor coming this year, as well as the new 4-Zone sprinkler controller and the new weather sensor coming next year.

The new host timer Pixie-Z1 is re-designed from the original Pixie timer in many ways:

1. Always online for instant quick runs. No more sleep mode

2. Powered by two AA alkaline batteries with approximately one year of battery life. Notifications on low battery

3. Supports Google Home and Google Assistant

The Netro Zigbee Hub and Pixie-Z1 are expected to ship in September. To join the Tester program please email to info@netrohome.com and we will send you a discount code in return for feedbacks.

Thanks, 

Netro Inc

Is there some kind of local control except directly on the spark itself? I cant seem to find a way to manually turn on a zone without running a one off program wich is not instant. Let say i want to turn on a valve to do quick test

We currently are under stage 3 restrictions, every other week on certain days. Photo to follow showing our restrictions & the smart app restrictions. 

I haven't seen a response from Netro on this topic for a while so wondered about the status. Does Netro plan to support "Home Assistant" integration?  HA is a very popular open source home automation platform that already has support for most other irrigation controllers.

I am having issues with my zones running when they aren't scheduled to and I can't shut them off. The runs are not showing in the app either. I unplugged Zone 1 from the controller (currently the zone that is running unscheduled) and it didn't shut it off. What do I do?

The Sprite LED light is not lit even though the controller is working fine. 

Hello.

Everything was fine so far with my sprite controller and I must say I like it a lot.

During this Saturday, I was not able to reach the app. It was opening and closing right after. I reinstalled it. Same behaviour. I installed it on another phone with the same result.

I went to the main website and could witness no login or forum was available allegedly due to a high volume of traffic. 

My device should be able to work independently from your servers availability. If your company runs of business today, how are your customer going to use the devices they bought from you?

It is urgent, you update your app to be able to work autonomously in offline mode, regardless the state of your servers 

Netro weather not setting schedule for watering.  I have to water manually.  Why?  I do not have smart sensors so that is not selected.  All zones are enabled, but If I do not set a manual watering schedule it won't water.  Also it is treating every day as a rain day.  How do I change this?

I would like to be able to customize the smart watering feature. Unfortunately, the application rate calculation for the sprinkler specifications seam to be incorrect. For example, I use hunter mp rotator rotary spray nozzles to irrigation a specific section of grass. They have a really low application rate at about 0.4 inches per hour. In comparison, I have another section of lawn where I use Rainbird RVan rotary sprays with an application rate closer to 0.68 inches an hour. Using the default settings for rotary sprays does not account for this range of application rates. When I use the customized mode smart zone function and I input the application rates for the sprinkler specifications, the calculation for duration increases to above 3000 minutes! Am I missing something? It would be incredibly helpful if I could be able to customize smart watering based on the application rates of my sprinklers.