I want to be able to turn off regularly scheduled watering automatically when:

1.  it's raining or
2.  it is expected to rain based on the weather forecast.

The automatic shutoff watering could be done by an App or a gadget connected to the Netro mechanism. Appreciate letting me know how I could do this?

Buonasera,

quando avvio l'irrigazione, sia in manuale che in automatico, la centralina attiva per circa 2 secondi la zona e la pompa e poi si spegne, mentre  dal APP sembra che proceda tutto regolarmente.

My unit does not skip watering on days where it’s forecast for 1 inches or even it's raining.

In the whisperers manual it says it will show up in the weather section but I don't see it. Anyone else have this issue?

Hello,

I have 6 zones setup, all of them with the same characteristics and settings, yet 2 of the zones never water, meaning the next watering time is never set.

Your help is appreciated

 

Hi,

I set the working time gap between 4 to 8 Am, cause after that i will have the robot mowing.

Most of the time the Smart schedule respects those limits, but in some days The schedule keeps watering till 10am, and restarts at 6pm.

Is there any setting I'm missing? 

Buongiorno,

da circa un mesa la cella fotovoltaica non ricarica la batteria che piano paino si è scaricata e l’ho dovuta ricaricare con il cavo usb.

L’apparato va sostituito?

Acquisto 20/03/2023 con Amazon.

Salve a tutti, aprendo spesso l'app mi sono reso conto che con frequenza mi da Off line, poi basta fare disabilita e riabilita e tutto ritorna nella norma. È normale?? Ci sono opzioni per ovviare a questo problema?

Grazie a tutti

Hi there,

I have an irrigation system in my garden with 7 zones. The solenoid valves and the irrigation controller are new. Irrigation was already in place when I bought the house, so I don't know where the underground pipes run.

When I open one of the zones, no sprinkler pops up. I don't know if the pipe is clogged or if the sprinklers were removed or just don't work. Digging in my garden is very difficult because the soil is very stony.

Is there any technique, trick or machine that will allow me to track the underground pipe in that area? I would like to rehabilitate it.

Thanks! 

Any comments are welcome.

Regards, 

Hi just installed a sprite 6. I can here zone turn on then immediately turns off but the timer is still running on the app. I can hear the water stop and start in each zone ; the app thinks it's watering but the valve closes. Same for all zones

Thansk 

Wondering how to use the online weather forecast and be able to use that information to turn off the next day scheduled watering. 

I'm checking the rainy days manual and turn on/off the system which is cumbersome! Appreciate letting me know.

I bought a new phone today and am unable to water my lawn and vegetable garden because the app asks for a password, which I have forgotten.

I have tried number of times to get it to open up with a new password and the app still does not go back to normal.

Please call me on my cell phone.  209-482-0316

I would like to be able to get this to work because it is getting hot in California.  It is to be in the 90's tomorrow.

Linda Lundgren

• I have received a new Pixie-Z1 and a hub
• Downloaded the Netro iOS App from the UK app store
• In the App I added the hub connecting through Bluetooth and configuring WiFi access for the hub
• Hub shows constant green light

Why netro don’t have notifications when it’s watering. Begging and end like wother. Orbits b havy and RainMachine 

Hi,

Firstly, I have a Sprite and love it! Easy to install, easy to set up and I'm really impressed with it.

I have a smart water meter so I know exactly how much water each zone uses and I can see that the Netro Sprite's estimate of water used during irrigation is about 75% of the actual usage as reported by my water meter.  This means that I am probably over watering.

Is there an easy way in the app to calibrate the expected flow rate (litres/minute) of a zone's sprinklers such that the smart algorithms deliver closer to the amount of water they think is needed?  Or put it another way, instead of calculating it needs to run a zone for say 10 minutes, they would just run for 7.5 minutes.

I have a delay set on 5 days, I try to change it to reduce to 1 day but the system stay on 5

I have a sprit 6 I just hydro seeded so I have to keep the ground damp. I’m at work away from the house and the app says it didn’t watered in my last 2 programs. I tried to do a manual run and it wouldn’t work. Do I have to be home for it to work?

Hi, is impossible access app netro

Good morning,

I have three Wisperers and a Pixie. I can't install my three Wisperers in the same area as my Pixie. I managed to install Wisperer with my Pixie but the other two. How do I install all Wisperer with my Pixie?

If the Pixie is installed in a different area than the Wisperers, does it all work together to optimize my garden watering?

Apollon16