更多篩選條件

Can't reconnect wifi

Yuriy Andamasov
更新時間 2023-07-05 21:14:40 UTC 

sprite-6 went offline

impossible to reconnect to wifi

never pass step 5 

sprite-6 blinking all the time

worked just fine almost year


瀏覽: 1525   回覆: 1

New Sprite will not connect to Wifi

Michael Burberry
更新時間 2023-07-05 22:39:33 UTC 
I just bought a Sprite 6 for my new house. It will not connect to WiFi. I checked the password, added a range extender, made sure I was connecting to the 2.4 channel, and opened up guest access, but it still won’t connect. I even unhooked the pump wires and tried to set it up right next to my router and still nothing.I have one set up at my old house and have never had issues.
瀏覽: 1411   回覆: 1

Can I run this thing unrestricted

John Zuzula
更新時間 2023-07-06 22:57:53 UTC 
Is this unit capable of running unrestricted? My shit is dying here and I'm not happy with the difficulty associated with running this thing! I find it way too complicated! I sincerly wish I hadn't purchased it!
瀏覽: 1582   回覆: 2

Cannot set Weather Underground ICARPI46 cto my netro

Bruno
更新時間 2023-07-07 22:09:44 UTC 
話題: Netro App

Hi,


I can't set ICARPI46 (or any) WU station ID as my weather provider, there is a bug?

瀏覽: 1539   回覆: 1

Moisture and weather API

Andrea D.
更新時間 2023-07-07 23:20:33 UTC 

Hello there,

I'm making use of Netro API to:

  • Update the soil moisture of my zone in order to get precise and updated data
  • Update past-1-day, current and 5-day forecast
API calls works, but I get weird values for the zone: I put 38% as humidity and I see a 23% in the app, if I send 100% then I get 70%. How this works? There are some kind of calculations that take in account historical data? (I have a Whisperer sensor I've stopped using since it give quite random data).

As I've seen even meteo information change humidity value of the zone. 


Thanks 

瀏覽: 1525   回覆: 2

Pixie Z1

ke7vng
更新時間 2023-07-08 02:25:00 UTC 
Will the hub continue to run the watering schedule when there is no internet service? I am watering at a remote location where internet service is spotty, and I am not always there.
瀏覽: 1383   回覆: 1

Why no cycle soak setting?

ducati1198804
更新時間 2023-07-08 19:56:33 UTC 
Why is there no cycle soak settings in these controllers. Also what about anti water hamer setting?  
瀏覽: 1509   回覆: 1

Restrictions

Mark Killeen
更新時間 2023-07-10 22:48:23 UTC 
How do I set system so that it does not water between the hours of 10 pm and 8 am?
瀏覽: 1427   回覆: 0

Restrictions

Mark Killeen
更新時間 2023-07-10 22:48:36 UTC 
How do I set system so that it does not water between the hours of 10 pm and 8 am?
瀏覽: 1461   回覆: 1

Timer shows watering, but no watering!

Jay Fahar
更新時間 2023-07-11 12:26:26 UTC 
話題: Netro App

My scheduled watering starts at 7AM. Since we had rains for the past two days, the API apparently senses the moistures in the soil and stops watering as scheduled.  Today I monitired Netro showing zone-1 was ON. I looked outside and didn't see the zone watering!  I then went to the basement and listened for water flowing in the pipies. No noise!

I concluded that NETRO still shows scheduled watering, but the vales to all Zones are shutoff!!!?  This is a sofware bug and needs to be fixed?!

瀏覽: 1619   回覆: 1

Warranty

BOBBY BROWNE
更新時間 2023-07-11 17:32:17 UTC 
How do I check if my pixie one is still in warranty?
瀏覽: 1456   回覆: 1

Random Manual Start

Mario Hardy
更新時間 2023-07-13 04:52:51 UTC 
話題: Netro App

Hi, I woke up twice this week to see that Netro has launched unscheduled manual run for one hour in the middle of the night.

How to make this stop???

瀏覽: 1430   回覆: 0

Random Manual Start

Mario Hardy
更新時間 2023-07-13 04:53:04 UTC 
話題: Netro App

Hi, I woke up twice this week to see that Netro has launched unscheduled manual run for one hour in the middle of the night.

How to make this stop???

瀏覽: 1554   回覆: 1

Whisperer v1 reporting temp over 800 degrees

sellet
更新時間 2023-07-13 16:20:23 UTC 
I have a v1 Whisperer that’s almost 3 years old. The temp readings are now showing up as over 800 degrees.  I’ve tried to reset it and it’s still reporting the same.  Perhaps another ‘harder’ reset?  Software update?  Out am I just going to need to buy a new one?
瀏覽: 1487   回覆: 1

Problème de localisation

Yoann Lienard
更新時間 2023-07-16 10:54:55 UTC 
話題: Netro App

Bonjour ,

Je ne peux pas installer mon capteur de plante parce que lors de l’installation je ne peux pas choisir la France l’application ne reconnaît que les états Unis. 

Comment faire ? 

Merci de votre réponse. 

Yoann 

瀏覽: 1453   回覆: 1

Watering even when it's wet

Jure
更新時間 2023-07-16 14:14:17 UTC 

Hi!


My Netro app seems to be watering even though it has been raining a lot prevoius day. Zone is set to Smart - Regular. 

瀏覽: 1631   回覆: 1

Weather underground

Dion Friedt
更新時間 2023-07-17 03:09:10 UTC 
Is there a way to combine the weather underground rain data with the netro forcast as well as the temp? I have found that netro forcast/ temp tend to be very good but the moisture from rain tends to be off quite a bit,  I have a wheather underground station mere blocks away, but the forecast stinks.
瀏覽: 1352   回覆: 1

Preferences about time

Paolo Vecchi
更新時間 2023-07-17 07:41:39 UTC 
話題: Netro App
Hi, i’ve setted two preferred time ranges for the programs. But smart app is not considering that. What is my fault? Thanks
瀏覽: 1428   回覆: 1

Manual watering donato chance umidity

Andrea Vecchia
更新時間 2023-07-17 14:34:51 UTC 

Why when I add manully watering time the humidity of the zone don't  change?

Why the next smart program don't reduce time ?

Thank you.

瀏覽: 1417   回覆: 1

Not calculating for ecomode?

Melissa N
更新時間 2023-07-20 05:42:48 UTC 
話題: Netro App

I’ve set all zones to eco mode…but one zone keeps calculating to irrigate for 40-50 mins every 7days which doesn’t sound like ecomode to me. Also it seems to be the reason why our water bill shot up.


How can I fix this?

瀏覽: 1321   回覆: 1