Hello ,

I have random manual run in the log some times few seconds sometimes few minutes 

I’m 100% sure it’s not manual, I.e. nobody manually activated watering 

I have noticed recently but if I got back to the history I see it’s going on for a while … 

How it be fixed ? 

Ilya 

I’ve tried all of the trouble shooting and suggested steps to reconnect my Sprite 6 to my home network.  I’ve been trying for weeks.  I need to speak to someone in person to try to resolve this.  I either need a phone number to call or need someone to contact me at (414) 949-1944.

Thanks,

Bob

Unfortunately, this is not watering at all. Please reach out to me! GCarman2000@gmail.com

Hi, anyone knows if the white lights on the hardware could be turned off? Thanks 

Hello, I’ve often thought it would be nice to have the ability to control my smart watering a little further by say, having a percentage adjustment? I’ve played with the settings and gone from Normal watering to Eco to Frequent but find that the differences are more distinct than I want them. Is there a way or maybe an update coming that will allow me to simply put that I want to water 70, 80 percent, etc? I could much more easily manage my water bill and usage with that handy feature. Please let me know if I’m missing it somewhere! Thanks!!

If the system lost the connection, it keeps the last schedule?

I am worry about the wstering and I am far away from home.

Thanks

Hello all!

I've just installed the Pixie smart house faucet timer and whenever I try to link the Netro service to my Google Home I get a message saying no devices can be found.

Is there some setting I need to enable to allow the device to be found by Google Home?

Even after several hours in full sun my Whisperer looks dead and does not send any signal.

Shirt or long pushes on the button does not change anything.

I suppose that while not that old I have to buy a new one.

Thanks for your advice

It looks like the sprinklers are not jumping out because of the water pressure is maybe down right after I installed pixie

Raining hard outside for at least 20 minutes but yet, Netro weather n others didn't detect it?

Good afternoon.

Sometime my controller lost the connection to the router Wi-Fi for some time ( one day or more) and then it riconnettes automatically. I don’t know why.

This morning it lost the connection , but after 10 hours it was still disconnetter. I tried to re connect it manuali, but the controller didn’t find my router. The router is very closed to the controller. When I connect my phone to the WiFi of the controller, i see “no connection”. So. Ok the controller is off line and I can’t connect it. what can I do? I already try to reset the controller turning of the elettrico power. 

I’m in the Orlando area and on Wednesday I just had hurricane Ian drop over 5” of rain on my lawn. Discover tab shows on Wednesday I had less than .3” of rainfall. I’m using the Netro weather station. Is there something I need to change or update?

I was wondering if there’s a relationship between the weather predicted on the app and the watering frequency. Here it shows daily temperature predicted at 90 degrees when in fact it’s 82 / 83 when 2 watering a week are sufficient. My app wants to water every day and unless I turn it off I don’t see a way to negotiate a more rational and way less costly rhythm. 

I set up my metro system this morning.  I made an error in programming the watering schedule.  How do I reprogram the Smart watering program?  I have been unable to do it.

Also I would like to point out that yesterday at midnight the irrigation started by itself, without having programmed anything, with the app I could not turn off I had to stattare everything through the electrical panel.
As ever this happens, should be a convenience this control unit controlled by the app instead of problems.

My netro is using smart schedule. Even though i have ECO on each zone, zones are watering for more than 20 minutes. it rained last night and today morning it was watering for more than 20 minutes.

 How do i change this?

lot of water being wasted. 

Thanks,

Ananth Bandla

I have seen quick stop watering on landing page in app once. Than not anymore. Is this a recent feature? Looks not stable. Meanwhile I cannot see stop button on manual run page where it was before. Shame that everone got wet on garden party.

Hi today the smart schedule wateres while sensors above the 50% humid. I stopped manually. It is weird because the schedule shows to skip the zone but it watered anyway. Zone 3 and zone 4. Zone 1 is correct

May you check it?

Can you guys add weather station

KVACHEST132

So has anyone else have random sprinklers turn on even though there is no program active for the sprinkler?

I had to turn off most of my programs because I have to reduce my sprinkler heads. And now I’m getting random sprinklers coming on.