App Notifications for watering

Brett Lilly
Updated at 2020-04-13 18:42:28 UTC 

Mine is less of a question and more of a request. I would like notifications from the app that tells me when the Sprite has started watering or has skipped a watering. After setting up my Sprite this weekend, it skipped the first watering for low temps, but I had no idea of that. Also, I run my sprinklers in the early morning and it would be much easier to read the notification that it did water than have to go into the app and check it manually. This is the only thing I will miss after switching from a Rachio controller, otherwise it is everything I need.


I understand you don't want to spam us with notifications, but you could add a "Notifications" tab in the settings page where we could choose the notifications we want to receive. I would at least like the choice.

View: 227   Answer: 1

Netro app on google home

Danilo
Updated at 2020-04-11 10:07:58 UTC 

Hi,

I found netro home app in google home and add with my account to my home. When I click on it I can only start and stop netro without control on which zone I want to do this action. I suppose that it will go in order through the zones. Could be possible to add a zone control on this action? 

Thanks for your support.

View: 216   Answer: 1

Wifi issue smart disconnection!

Luca Manfrin
Updated at 2020-04-10 11:43:03 UTC 

This device is becoming a nightmare.


I bought 2 of these last week and they are unable to reconnect when my router drop connection some times. 


I continue to reset and restore everything each time I have a disconnection because both my devices are unable to reconnect. 


Probably I have to send back them to the seller or please give me a real resolution


I need to water my garden not spend hours and hours about this non smart device

Thank you


View: 327   Answer: 2

Incorrect weather conditions

Andrea Merito
Updated at 2020-04-09 20:33:11 UTC 
Topic: General


as the state / province is changed because Madrid is specified instead of Catania, consequently the weather is incorrect.

View: 248   Answer: 1

Resetting Netro Whisperer

Patrick
Updated at 2020-04-09 19:34:52 UTC 
How do I do a factory reset on my Netro Whisperer?
View: 282   Answer: 1

Power adapter - eu

David B.
Updated at 2020-04-08 13:43:20 UTC 
Hi

I have a netro sprite with an original power adapter.
How ca i connet this to my 220/230 Volt energynet in Austria pls?

A normal Adapter will not work since i have to tansform volt and ampere to 800ma and 110volt as far as i could find informations.

Kind regards david
View: 229   Answer: 1

how change weather in celsius or change country?

Seb Cruzer
Updated at 2020-04-07 15:03:43 UTC 

hello, 


I don't know why, since today my Netro smart system show temperatures in F° and I'm in France.


usualy it works well in Celsius, i've restart the system (shutdown out of power), change weather channel, not solved...


I try to change country or Zip Code but the system doesn't let you to do it on smartphone and PC.


Please help!


View: 277   Answer: 2

Irrigation time striketrough

Luca Manfrin
Updated at 2020-04-07 12:34:22 UTC 

Why sometimes the irrigation time is striketrough? it seems to be a temporary condition, but is not clear the reason. 


when triketrough I can t press play and watering


thank you

View: 222   Answer: 1

Watering notification into SMARTPHONE notification drawer

Luca Manfrin
Updated at 2020-04-07 10:07:29 UTC 

It could be useful to have watering notifications and few commands into smartphone notification drawer when system is watering.


like a song into my smartphone!

-PLAY/PAUSE WATERING FOR A SET TIME EQUAL TO THIS WATERING RUN PROGRAM

-SKIP TO NEXT WATERING ZONE PROGRAM

-SKIP FOR TODAY

-RUN AGAIN LAST WATERING ZONE, WITH SAME DURATION


View: 231   Answer: 1

Irrigation time of 0 minutes. then?

Luca Manfrin
Updated at 2020-04-07 09:37:54 UTC 
Topic: General

What's the point option to set the irrigation time at 0 minutes in manual execution? 

It would be more useful a 30 seconds run for testing the valves.

View: 236   Answer: 1

Restore device set up into all without RST the unit

Luca Manfrin
Updated at 2020-04-07 09:33:03 UTC 

I have accidentally removed one of my devices from the app. 


There is a way to restore it without reset from the controller? in that case i would need to set up all zones again from the beginning.

View: 235   Answer: 1

Programming time vs Restrictions

Luca Manfrin
Updated at 2020-04-07 09:28:22 UTC 

Which is the difference between specify time range into preferences/programming and restrictions rules?


it seems that programming set a run time range to be applied to all zones while restritcions is a more flexible way to set time range and many other rules that can be applied to all or to specific zone. is it correct?


if programming time range is (completely) different (means never overlapped to) from time range set with restriction rules..what happens? not watering at all?

View: 224   Answer: 1

Can I check to which weather forecast local station my device is linked when Dark Sky service is on?

Luca Manfrin
Updated at 2020-04-07 09:22:40 UTC 
Can I check to which forecast local station my device is linked when Dark Sky service is on?
View: 246   Answer: 1

How to stop watering if device is offline?

Luca Manfrin
Updated at 2020-04-07 09:19:37 UTC 
How to stop watering if device is offline?
View: 234   Answer: 1

Settings

Massimo Povolo
Updated at 2020-04-07 06:31:48 UTC 

From today, the temperature is shown in fahrenheit instead of Celsius, why? Where I can change the setting?

Thanks.

View: 313   Answer: 5

Host mode

Luca Manfrin
Updated at 2020-04-06 17:55:38 UTC 
What is host mode? 
View: 258   Answer: 1

Home Assistant integration

Casey S
Updated at 2020-04-05 19:46:53 UTC 

Hi, I was interested to know if you will be integrating Netro System to HASS.IO? This is a platform may people use and it would be great to have it integrated. 


Also, I see that there is some type of http page that shows files and SSH is enabled by default. These are security concerns and should be turned off if not used. 

View: 275   Answer: 1

Remove watered due to System Issue

Casey S
Updated at 2020-04-05 19:41:30 UTC 
Hi, I wanted to know if I could remove a watering entry because of a system failure. Basically I had an issue where the wire on the master valve was disconnected and the scheduled watering sessions did not work for the week. After I figured out the problem, my system shows 80% watered but my grass is brown. I know I could take a hose to the lawn or just run the system till it hits 100% but it would be easier to just delete the entries and have the system understand it was never watered those days. Have not seen any way to do this so maybe I a missing something.
View: 211   Answer: 1

Whisperer

Joe Ryan
Updated at 2020-04-05 17:48:32 UTC 
Can I use the whisperer to control watering of the Sprite controller? If I turn off smart zone. I notice you have Watering adjustment on the whisperer sensor where I can set moisture threshold to add watering and moisture threshold to skip watering. Would this work. I'm using this to water planters and small raised beds. Advice appreciated.
View: 254   Answer: 1

power adaptor

paolo cellini
Updated at 2020-04-04 14:39:25 UTC 

Hi 

just received a Netro Sprite controller 12 sone without power adapter 

I am in Rome , Italy

We have 240 volts energy supply

what adapter have i to buy ?

thanks 

paolo 

View: 250   Answer: 2