Questions about Netro app

Luis Aguilar
Updated at 2020-10-11 17:47:55 UTC 

I have installed Netro Sprite with no sensors (they are not available in Amazon Spain any more).

I have a few questions after my first day:


1. App shows different humidity values for each zone. Where does that info come from if I don't have any sensor?


2. When I click on a specific zone, I don't see any irrigation in the chart.


3. I have a 'fir tree' in my garden, but I haven't found it in the database. In any case, if I have a fir tree surrounded by grass, what should I configure to make sure that both the fir tree and grass are taken into account.

View: 287   Answer: 1

Cancellare sensore whisperer dall’account

Simone Nolletti
Updated at 2020-10-11 11:46:06 UTC 

Buonasera,

ho impostato il sensore whisperer nel mio account come libero, non collegato alle due centraline.

Vorrei cancellare il sensore ma non riesco a farlo la voce rimane sempre presente nell’account e non esiste un tasto per eliminarlo.



View: 241   Answer: 1

Switch Off automatically

Carlos Jimenez
Updated at 2020-10-09 20:18:31 UTC 
Hi, I just bought a new Netro Sprite 12 device.
But I had have some problems when I try to run with a differents solenoid valvules.

I found two cases,

1) I start my zone in test mode. Switch-on and ok, swich-off, doesnt run. I try to switch on again, nothing happen,  Switch-off and, solenoid vavule close. Why does not stopped?!

2) Star my zone and run, in a few seconds (sometimes less a one second), automatically stop. Why? Maybe wifi problem?

I dont understand what the problems are...

Pls coulsd you help me, as far as possible?
Thanks 

View: 269   Answer: 1

OFFLINE

Javier López-Guerrero
Updated at 2020-10-03 08:20:26 UTC 

My SPRITE-12 is permanently offline. I tried to reconnect it but RST button doesn’t work. I push it for less than one second and nothing happens.

Help!

Javier

View: 293   Answer: 2

Zones not watering but show watering on App

Atif Khan
Updated at 2020-10-01 14:21:57 UTC 
I just bought a replacement controller for my old Hunter. All connections are done by color codes as per old controller and I see all zones in App but when I manually try to test each zone, only one of the 10-zones start. However, when I press STOP, it does not stop. What’s wrong in manual testing ?
View: 271   Answer: 1

Second house

HaccasDave
Updated at 2020-09-29 18:20:51 UTC 

I'm in the very fortunate position of having 2 homes - one in the UK and one in Spain. We've just had the garden reworked in the UK and I've been able to install an irrigation system controlled by a single Sprite controller. 


I'm very pleased with how this is working - and now want to upgrade the manual irrigation system we have in our Spanish house to a smart system. Can Netrohome / the (Android) app manage 2 different irrigation systems in 2 different locations (with 2 very different climates)?


Many thanks.

View: 295   Answer: 1

Controller LED Light

afadool
Updated at 2020-09-22 14:01:57 UTC 
My controller light is attracting bugs at night.  Is there a way to disable the always on LED and just have it blink if there is a problem?  
View: 291   Answer: 1

HomeOwner

Isaac Fishman
Updated at 2020-09-21 01:14:55 UTC 
Netro app worked fine for 4 months. Then zone 3 stopped watering, but netro is showing zone 3 as watering.  How do I fix this? Thanks!
View: 342   Answer: 1

Multiple sprinklers in one zone - and is there a Test System ?

Cormac Champion
Updated at 2020-09-19 13:48:55 UTC 

Hi there,


Can zones be setup with several sprinklers in the one zone ?  From what I can see from another question, is it correct that you setup the aproximate size of each zone ?  I have several zones with maybe 10 sprinklers in each zone, with sprinklers about 3m apart.


Also, is there any access to a test / simulation system that I can setup my location and see how well it would adapt to weather.  I am planning the installation for southern Spain


Thanks in advance

View: 303   Answer: 1

Simple on/off

gmcg1984
Updated at 2020-09-17 01:54:35 UTC 
 Isn’t there a simple way to remote trigger the device from the app without all the time constraints? It does not seem easy for me to, for example, turn on the device and let it run for three hours when I’m away from home and then turn it off remotely. I want to use this to hook up a fire suppression system.
View: 288   Answer: 1

Contact

Santiago Errazuriz
Updated at 2020-09-16 14:44:36 UTC 
Topic: General
Hello good morning, greetings from Chile. I need to know if I can have a whatsapp or contact email.
View: 278   Answer: 1

Start time change

Franco Storato
Updated at 2020-09-16 06:00:59 UTC 

Hi,

How can I change the start time for all the stations?

Thank you in advance, 

Franco

View: 261   Answer: 1

loose connection on install

Lawrence Jones
Updated at 2020-09-15 22:49:22 UTC 

The unit is working good, yeah!  The way the wires get tab/push for contact is really cheap.  The "spring" of the contact is very , very loose.

Move the wire at all and no contact.  Then trouble shooting to find where trouble is.  Not a good design. Need a much more firm grip on the bare wire. something else or just poor quality?


View: 285   Answer: 1

Potted plant on terrace

Andrea Zorgniotti
Updated at 2020-09-14 07:46:03 UTC 

Hi I Have a big terrace with many plants divided in 3 zone controlled by Netro. To use the smart watering and have an acceptable time/frequence for watering (6 min every 2.5 days) I have to set user and from 80% to 85% umidity. If I set frequent or extra water the estimated frequency is 4/5 days. Considering in summer my setting seems nor giving enough water to plants what kind of setting do you suggest to increase the frequency (change msq, kind of sprinkle or whatever).


Thanks in advance for answer

View: 296   Answer: 1

Way to add weather stations

Curt Lizzi
Updated at 2020-09-12 01:16:55 UTC 
I find the Weather apps to be very inaccurate with respect to rainfall at my home. Is there a way to add a near by weather station for better accuracy?
View: 326   Answer: 1

IFTTT - Watering Schedule

Christophe Benoit
Updated at 2020-09-10 05:56:28 UTC 

Hello,


I am using the IFTTT event "Schedule". I can then get the information related to a watering schedule when it is finished as expected but "start time" and "end time" are wrong since there are two hours of lag with reality. For example when it actually started at 6:25 am it gives me 8:25 am and same sanction for the end time.

My controller is located in France.


It would be nice if you could fix this issue or tell me how to configure.


Thanks in advance,

Christophe Benoit

View: 317   Answer: 1

Rain Snow Delay

R H
Updated at 2020-09-10 03:35:37 UTC 
How do I get the rain delay function to work?
View: 280   Answer: 1

Shut down for winter

Chad Fuller
Updated at 2020-09-10 02:01:10 UTC 

What’s the best way to shut these off for winter ? 

View: 304   Answer: 1

Netro and Google home

Cesar
Updated at 2020-09-08 08:26:17 UTC 

HI 

I have netro with 3 sensors. I do have google home at home and I would like to connect. I following the instructions BELOW, with no success, because i cant find the buttom LINK to be redirected to accouunt login page

Could you please help



Please use your google assistant app to find "Netro Sprite", either by directly typing "talk to Netro Sprite" or searching through the google assistant explorer. Then tap the "link" button, and you will be redirected to the account login page. After using your Netro account to be successfully linked, you will be able to use google home to work with Netro. You can talk to your Google home like: "Hey google, ask Netro Sprite to water zone two for 5 minutes." or "Hey google, ask Netro Sprite to stop watering." The Netro Sprite should start/stop watering accordingly.


View: 286   Answer: 1

Temporarily stop all watering

Williams
Updated at 2020-09-07 15:57:32 UTC 
Topic: General
How do I temporarily stop all watering without losing the programming?
View: 312   Answer: 1