More filters

Sprite wont connect to your internet so I can move forward

cjulian
Updated at 2024-10-05 18:05:09 UTC 

My controller has been out almost a month. I have factory reset, short reset uninstalled app, and unplugged it. No matter what I do, i cannot get past the connect to netro wifi step. I need to blow out my sprinklers and I cannot get my device to work to manually run them. It will say its connected and do the spinning wait thing, then suddenly tell me to connect to the netro internet again. When I go to do it again it says no internet connection. Please help me. I sent an email from my email as the registered user (husband) is deployed in the middle east. Please look for an email from "kimbo__@" 


Thanks!

View: 501   Answer: 1

Set up weather underground

Giovannini Alex
Updated at 2024-10-05 18:35:32 UTC 

Hi,


I can't set ITREVI107 station ID ,of weather underground,as my weather provider,  for sprite 6


Thank you


Alex

View: 508   Answer: 1

Water restriction schedule problem

Carolyn Simmons
Updated at 2024-10-08 00:12:28 UTC 
Topic: General
I cannot get the system to set up our county water restriction schedule. It is Wed and Saturday up to 10am in morning and after 6 pm at night. I would really like to run each zone once in the morning and once at night!  Any suggestions before I get fined $200.00?
View: 582   Answer: 1

Random intermittently watering

12330barryknoll
Updated at 2024-10-10 01:51:03 UTC 
Seems like my system has a mind of its own.  It'll water on time for a few weeks then stop then water again. 
View: 533   Answer: 1

Sprite controller cycles on and off wifi

BrettEnyart
Updated at 2024-10-13 18:02:06 UTC 
My Netro controller is about three years old. I recently changed my Wi-Fi router about two months ago.  I repaired the controller with the new Wi-Fi, all seemed to work for a few days. Then the controller started cycling on and off of Wi-Fi. There are windows of several minutes that I can communicate with the controller, then windows of several hours when I cannot.  The light on the controller is solid for about 20 seconds, then three slow blinks, solid for 20 seconds, then three slow blanks, this pattern continues indefinitely. I have repaired the controller to WiFi several times. I have unplugged and then plugged the controller back in multiple times. Nothing seems to resolve the issue. It’s frustrating when I’m changing sprinkler heads and have to wait several hours to try a manual run to test the new heads. Has anyone else experience this and more importantly solved this issue? Thanks for the help!
View: 540   Answer: 1

Conrtoler

John Zuzula
Updated at 2024-10-19 23:45:24 UTC 
Why is connection lost with my cover on. But when I take it off it then reconnects? My lawn once again looks like crap because this thing glitches out.
View: 464   Answer: 1

Zine will not run

TJ Woods
Updated at 2024-10-27 14:40:45 UTC 
I changed the sprinkler head on zone 5 after installing the new controller. All zones work but 5. I can run it manually. It won’t work on smart watering.
View: 501   Answer: 1

Zone won't shut off.

shoo.shoo
Updated at 2024-11-10 05:55:43 UTC 

Hi,


I have 4 zones and a master valve. When I run any of the zones, they won't shut off when the timer runs out. If I switch the AC power off, then the valve will shut. I have checked the valve and it has no issue with opening and closing except when the sprite is running it. I tested cables for continuity, and I have tried swapping cables with no change. My ac power pack is AC 24v.


This issue affects each of the valves but only when controlled via the sprite. The valves are fully operational otherwise.


Hoping for a fix, otherwise will return to Amazon under warranty and get another brand.

View: 300   Answer: 1

Konrad

berlin
Updated at 2024-11-10 09:36:28 UTC 

Hello,

I had to change my google password and now I lost all my datas from my last installation in my Netro system.

What can I do to find it again. Must I install everything new?

Who can help me?


Thank's

Konrad

View: 311   Answer: 1

Netro Spark valve testing

Peter Strohmayer
Updated at 2024-11-14 13:49:20 UTC 
How does the Spark test the valves?


I want to connect a 24V input sensor on the spark outlet channels to switch 2 knx connect valves in different location. Cabling to those valves is to long for 24V. 
The valve testing always says that there is not current and switch it off --> Do i need a resistor on the outlet to simulate a valve? If yes, which value should the resistor have?


Thanks,

Peter

View: 270   Answer: 1

Solenoid does not switch off

Nath Moyes
Updated at 2024-11-15 00:49:20 UTC 

Hello


My system has 5 solenoids.  All worked fine until recently.  One will turn on and off manually.  


However in smart timer it turns in but not off.  


How can I confirm if a app set up issue or a hardware issue with solenoid itself.  


Nath

View: 297   Answer: 1

Netro Pixie - Winter ❄️ Is coming

Andrea DS
Updated at 2024-11-27 21:01:38 UTC 

Hi,

I have a Netro Pixie  and I was wondering if it's safe to leave it outside in the garden during the winter. The temperatures here in North of Italy can drop as low as -5°C (23°F).

Is it okay for the unit to handle these conditions, or would it be better to move it indoors to avoid any potential damage? In any case is not expected to perform any watering activity until Spring time.

Thanks in advance for your advice!

View: 156   Answer: 0

Manual operation won’t come on

Carolyn Simmons
Updated at 2024-12-01 20:53:00 UTC 
I live in Conroe, TX and I cannot get the manual operation to come on. I’m supposed to water every 2 weeks during the winter months if I have not had rain. No rain in over 2 weeks so I need to turn it on. I do not have anything programmed right now. Any suggestions?
View: 135   Answer: 0

Sprite / Spark and Flume

Bruce P
Updated at 2024-12-12 22:28:13 UTC 

I have a Flume on my master water meter.

Is anyone familiar with any integration between Sprite/Spark and Flume?


Thinking of scenarios like:

If Flume water is already in use heavily (can be defined) then delay watering

Logic between Flume and either Metro to help with faulty valve / leak detection based on water (augmenting Spark's*)

If Flume detects water is shut off, don't run any Netro programs


* I read in Wency's reply at (https://netrohome.com/en/forum/posts/3479/show_question) that 

"The faulty valve detection relies on monitoring the voltage and current of the water valve's operational state. As for measuring the volume of water consumed, it's a consideration for future developments."

.

View: 4   Answer: 0