Hi 

After opening the app ( 3.0.1) 

it takes. sometimes. and random does not get online 

After shutting down apple smartphone … sometimes gets online sometimes not 

It seems that it connects correctly with my ipad 

Hi,
I have a problem with the control unit, every few days I lose the connection to the Wifi.

If I restart the router,

Netro remains disconnected (blinks), I must necessarily turn off Netro and turn it back on to be able to reconnect it to the router.

This is a problem because if I'm away from home, I can't do it.

how can it be solved?

My system is set to pause watering when below 7C. Currently it is 16/17C and my schedule is paused due to low temperature, why?

Good day all,

in my zone #2 I set up a Magnolia tree.

If I remove the tree and set up lawn, the app apparently does it, but when I come back to check,  it mixes things up:

This seems to happen only with zone #2: how can I fix it and get rid of the Magnolia tree in this zone ? Does it affect my watering calendar ?

Thanks for help.

Davide

EDIT: wrong zone ID, correct is Zone #2

Hi all,

is there any way to force the app to use ENG language ? The ITA translation is sometimes really bad and puzzling...  

I can volunteer to tune up the translation if needed.

Best Regards,

Davide

Why is My Netro light is blinking

Buongiorno, come si fa a programmare la centralina per innaffiare due volte in una notte ?

I've had the whisper sensor for about a year and it's worked great the entire time. I decided to add 2 more sensors for more zones and both of them are reporting absurd numbers more often than not. I have tried resetting them, moving them, nothing is working. Really not happy right now. Attached is a screenshot of a typical day's readings. 

In my schedule, some of my zones are showing as Smart Zones, the rest are not. They also schedule themselves in an undesirable order. How do I take control of my schedule and tell this thing to do what I want? I find this interface to be way too confusing. 

I was trying to edit/delete existing schedules. But seems not working

1. There was always a green circle running when I save the change and it never go away

2. If I close the app and come back again, the calendar still show old schedule 

3 however if I try to edit the schedule now, it shows the program had been removed (as shown in pic)

How do I allow a third-party to have control of my sprinklers? The situation would be for example if a irrigation lawn specialist is coming over to adjust my sprinkler heads and I don’t wanna have to follow him around and turn on zones etc.

Sprinklers are coming on but the ap is not showing the activity on each station. I have done a factory reset and still no luck. Help please. 

I am unable to have my new whisperer working. It doesn’t light on even after half a day under the sun.

I live in Katy Texas and have been using the Netro water controller in smart mode for over 2 years with no problems.  We received at least 1.5in of rain on the April 25, so I was dismayed to find my sprinkler system watering my yard on the morning of the 26th.  The rain graph in the app is showing 0.03in for the 25th and is clearly wrong.  I have tried changing to all the different weather providers, but the total rain accumulation doesn't change.  The frontal system that caused the rain passed over the entire area, so this is not a situation of local shower only affecting a localized area.   

I live in Spain and ubication selector do not let me specify my correcto location. I assume It is requieres to provide the Meteorological service the place where to predict weather, so if location is incorrect, the weather too and the watering planning is not optimized properly.

Please work It out un Next app releases.

Hello,

Is there a way to get a manual schedule to honor the rain forecast and not water on those days?  I need to be on a manual schedule for one zone as I have a wide variety of plants in that zone and I have to force a shot everyday cycle.  However if it rains I would like the app to not water that zone on that day

Thank you,

Dhar

When trying to use the Pixie to manually water the garden, I go to the Netro app and select the pixie. It shows "sleeping", 99%charged. I then select "manual run" and set a time. The app then grays out and says "communicating" as the timer begins counting down my preset manual time but the valve stays closed. Why? When does it open? 

Hi All,

I'm a satisfied Italian customer of Netro Sprite 12 zones since 2019!

Recently I set my router to shutdown the wifi during the night, the Netro sprite it's the only one device that don't automatically reconnect when wifi come up in the morning, the white LED still blinking. To reconnect at the network, I need to phisically shutdown and power on the Sprite.

Is there a "trick" or an update to cover this issue? HW Version: 1.2 , Firmware Version 1.1.3

Thanks in advance.

Giacomo

Hello,  how to establish in app the stop of irrigation schedule when rain previsión is on?

Thanks

I set up the pixie timer, everithing seems ok but the valve does not opens, nor with program nor in manual mode, no water at all.

can you help me?