moisture data missing when turn off irrigation

I have turn off the Netro irrigation on the 1rst of march using the app due to water restriction on my area.

I also use to download data using the API, my surprise is that moisture estimation for each zone are not calculated from first of the march because of the irrigation was stoped.

I think must be independent the stop watering action with the calculation of moisture levels…because the Netro is active and connected to Internet and everything is on, the only action that I took was to turn off watering, not turn off all the system!!

Thanks

Jose

回覆來自 Jose Lao

3
Jose Lao
 更新時間 2023-03-15 15:45:40 UTC

Is there another related problem, when I activate irrigation for 1 minute in order to be able to get moisture data using the API, the values obtained are similar that values 15 days ago (around 77%). It’s not real data!!, There is no rain for more than 15 days nor irrigation, so moisture must be below 40% or 30%. Seems that Netro doesn’t recalculate moisture when the irrigation is not enabled. So this will result in an erroneous starting point when the irrigation restrictions stop here.

 


瀏覽: 1351    讚: 0