The unit is working good, yeah!  The way the wires get tab/push for contact is really cheap.  The "spring" of the contact is very , very loose.

Move the wire at all and no contact.  Then trouble shooting to find where trouble is.  Not a good design. Need a much more firm grip on the bare wire. something else or just poor quality?

Hi I Have a big terrace with many plants divided in 3 zone controlled by Netro. To use the smart watering and have an acceptable time/frequence for watering (6 min every 2.5 days) I have to set user and from 80% to 85% umidity. If I set frequent or extra water the estimated frequency is 4/5 days. Considering in summer my setting seems nor giving enough water to plants what kind of setting do you suggest to increase the frequency (change msq, kind of sprinkle or whatever).

Thanks in advance for answer

Hello,

I am using the IFTTT event "Schedule". I can then get the information related to a watering schedule when it is finished as expected but "start time" and "end time" are wrong since there are two hours of lag with reality. For example when it actually started at 6:25 am it gives me 8:25 am and same sanction for the end time.

My controller is located in France.

It would be nice if you could fix this issue or tell me how to configure.

Thanks in advance,

Christophe Benoit

What’s the best way to shut these off for winter ? 

HI 

I have netro with 3 sensors. I do have google home at home and I would like to connect. I following the instructions BELOW, with no success, because i cant find the buttom LINK to be redirected to accouunt login page

Could you please help

Could you please remove “Plant Sensor” from dropdown menu at the top of the screen?

I installed two sensors today and added watering adjustment so that every time the humidity goes below 10% another 10 minutes of watering is added. Unfortunately, there is a bug and the watering time is triggered right away even though the faucet timer connects only every three hours. The additional watering time needs to be scheduled after the next timer sync and not right away. It's a clear bug.

Thanks

Hi,

I cannot log in Netro android app because my email is too long and it is not accepting all the characters. Please note that I do not have this problem with the IOS app.

Thanks

Hi there,

I am a great satisfied user of the Netro Sprite system I have been using for more than a year now without any significant issue.

I am also fond of the Jeedom system which is the most famous home automation box deployed in France. I am a DIY user of Jeedom since I created my own box through a raid1-debian-raspberry system which works finely. Nevertheless one important thing is missing to this box : a plugin for connecting the Netro Watering system to the rest of the home automation eco system. The only way I can integrate "a piece" of Netro is through the IFTTT integration you have been provided a couple of months ago. To be frank this IFTTT integration is not working very well and quite disappointing : functionally limited, high latency, lost of triggers, low resilience...and then unusable in my point of view.

I think it would be great if a real integration could be done. I'm in the starting blocks to develop the Jeedom plugin as soon as you decide to publish your API. Let me know, it's a matter of a few days of workload that I would easily find in my spare time. I am extremely motivated :-)

Well done for your system, it's the best on the market!

Regards,
Christophe 

Hi 

I added my wife as a manager successfully but i don t know how i can let her see the device from her app. At the moment the she log in but the appis not connected to any device

Thanks

Hi, 

My solar powered controller doesn’t charge its battery - not sure if it’s a battery problem - the controller is under direct sunlight for at least 6 hours every day.

I’ve set it to water for 1 hour every day so it’s a simple On/Off once a day.

Have other people had this issue?

Hi i have a watering adjustment on the whisperer set to kick in at 40%

Since it was turning on at random times immediately when it dropped below 40% I also added a general restriction from 10am to 8pm.

After I added the restriction the watering adjustment doesn't seem to work. It's past 8pm moisture is at 28% but the sprinklers did not turn on why?

Hello,

I have a 6 zone Netro sprite and need to update my wifi settings. No matter what I do I'm unable to get the Netro to enter host mode. I've tried hitting the RST button numerous times before or after manual reboots (even waiting the full 3+ minutes after re-plugging the device in). I even tried a full manual reset by holding the RST button for 10 seconds and the device still doesn't reset. I'm starting to doubt whether the reset button on my device works.

Has any one had any similar problems or pointers for just getting the Netro to join a new WiFi network? I'd rather not do a full reset and lose my zone settings, but at this point I've even tried that and can't get that working.