May I reconfigure localization of my Netro Spark without reset the device? I have configured the device at home and now installed at my summer house many miles far away. Thanks.

Hi,

How do I set zone size for lawn areas sprinklers that overlap one and other?  For example, I have 6 zones, and in the front Zone 1 and Zone 2 overlap the areas they water in some cases.  So, in my case if the area covered by both zones is a total of 1000 feet, do I set each zone for 500 feet or each zone for 1000 feet.  Thanks.

I find the most of the time when I do a manual run, the station select get stuck on communicating….  I keep trying over a period of time and eventually one of the times I hit the Play button it goes straight to Watering and the manual run is successful.

I had to replace a Pixie and cannot add a sensor to the area of garden it irrigates. The Timer->Settings->Sensor contains no add button.    Android 12 on a Samsung S21, App version 3.0.1

What am I missing? 

Home display is correct and shows Last watering the day before at the date and time in the program (watering planned everyday) but under Discover many days are shown as if there has not been any irrigation.

What could be the reason why ?

It would be nice to assign the wire color for each zone in the app.  Doesn’t need to be prominent but maybe on the setting > zones screen.

I try to setup station I’d for weather underground (IVALDE12). The app says invalid station id. Does any of you have a clue? 

I go to 'settings', location, and see OH United states.  the fields are protected and cannot be entered.  I go to the city I activate the samsung pass which enters the country Italy.  Save.  but when I return he did not save.  

I attach mp4 link

https://drive.google.com/file/d/1bhdM3LfRJ1OllTYUMGNNff1uxeMWQ071/view?usp=drivesdk

Hi 

After opening the app ( 3.0.1) 

it takes. sometimes. and random does not get online 

After shutting down apple smartphone … sometimes gets online sometimes not 

It seems that it connects correctly with my ipad 

Hi,
I have a problem with the control unit, every few days I lose the connection to the Wifi.

If I restart the router,

Netro remains disconnected (blinks), I must necessarily turn off Netro and turn it back on to be able to reconnect it to the router.

This is a problem because if I'm away from home, I can't do it.

how can it be solved?

My system is set to pause watering when below 7C. Currently it is 16/17C and my schedule is paused due to low temperature, why?

Good day all,

in my zone #2 I set up a Magnolia tree.

If I remove the tree and set up lawn, the app apparently does it, but when I come back to check,  it mixes things up:

This seems to happen only with zone #2: how can I fix it and get rid of the Magnolia tree in this zone ? Does it affect my watering calendar ?

Thanks for help.

Davide

EDIT: wrong zone ID, correct is Zone #2

Hi all,

is there any way to force the app to use ENG language ? The ITA translation is sometimes really bad and puzzling...  

I can volunteer to tune up the translation if needed.

Best Regards,

Davide

Why is My Netro light is blinking

Buongiorno, come si fa a programmare la centralina per innaffiare due volte in una notte ?

I've had the whisper sensor for about a year and it's worked great the entire time. I decided to add 2 more sensors for more zones and both of them are reporting absurd numbers more often than not. I have tried resetting them, moving them, nothing is working. Really not happy right now. Attached is a screenshot of a typical day's readings. 

In my schedule, some of my zones are showing as Smart Zones, the rest are not. They also schedule themselves in an undesirable order. How do I take control of my schedule and tell this thing to do what I want? I find this interface to be way too confusing. 

I was trying to edit/delete existing schedules. But seems not working

1. There was always a green circle running when I save the change and it never go away

2. If I close the app and come back again, the calendar still show old schedule 

3 however if I try to edit the schedule now, it shows the program had been removed (as shown in pic)

How do I allow a third-party to have control of my sprinklers? The situation would be for example if a irrigation lawn specialist is coming over to adjust my sprinkler heads and I don’t wanna have to follow him around and turn on zones etc.