更多篩選條件

Netro Spark 16: Issue with sprinklers not firing, then not turning off

davejburton@gmail.com
更新時間 2021-12-16 01:35:31 UTC 

Howdy!

I recently purchased a Spark 16 and have wired it in to a current srinkler system which was working fine with an old Toro controller. 


The Spark is acting very unusual, compred to the old system. As per the instruction booklet, I wired 8 wires in Zone 1-8 for the 8 sprinkler zones which are being used. I then wired the 24VAC and Common wires (x3)  in without an issue.


At first, both manual, smart and program modes worked with no issue.


I then tried to run a manual start with each zone runnig for 1 minute as a test. The app seemed to not be able to turn off the manual program if I hit the stop button in the app.


The unit was acting like there was no issue (valve test and server test on the app all looked fine), but if a program was due to run, the unit woudl display that a zone was active/watering, when it clearly was not watering or active.


I then did a full reset and install of the unit, and am still having the same issue.


The sprinkler wiring has 3 common wires - if I wire them all into the left hand side C wire port on the Aprk, it seems to struggle with turning on any zones at all, but intermitterntly. If I wire two of them into the left hand side C port, and one of them into the right hand side C port, the spark cant seem to turn off the sprinklers after they have turned on.


Help! It seems to be a common wire issue, and the app/unit also seems to be buggy.

瀏覽: 1792   回覆: 1

Whisperer sensor flashing blue

Lyndon Whyatt
更新時間 2021-12-22 19:53:57 UTC 
I reset my Whisperer sensor by following the reset instructions and on restart it flashed white. I added the sensor via the app but it didn’t produce a WiFi signal and I couldn’t connect to it in Settings on my iPhone. After a while it flashes dark blue. 

What is happening and how can I fix it?
瀏覽: 1979   回覆: 1

Manual recurring programs

Mark Johnston
更新時間 2021-12-23 23:56:32 UTC 
話題: Netro App

Merry Xmas everyone


I am trying to set up a recurring program that all my zones are watered for 15 minutes each every second day as there is currently a summer heat wave in New Zealand. However when I set the program up it does not show n the schedule. Is there a special trick to saving manual recurring programs??

瀏覽: 1815   回覆: 1

2 programs scheduled on one day

paul hewitt
更新時間 2021-12-24 05:21:45 UTC 

Hi


I added an afternoon program after the morning one had run to run daily as very hot over next few days. After setting it up I went into schedule to make sure it was there and all that appears on the day is the morning schedule with a yellow triangle with exclamation mark instead of the usual tick to say it was done. I did see it running the morning schedule.


Why doesn't the afternoon schedule show up as well as the morning one?


Paul

瀏覽: 1885   回覆: 1

Whisper at 0%

Darren Cassar
更新時間 2021-12-27 09:00:28 UTC 
My Whisper - Grass has been showing 0% power for the past few days.  It was overcast for a while so I thought that was the culprit but it has been sunny for the past 3 days and still showing 0%
瀏覽: 1764   回覆: 1

Master valve issue.

Danny L
更新時間 2021-12-29 04:13:11 UTC 
Hi. 
My systems master valve is turning of 2.5 min into a watering session. 
The zone timer keeps counting down but the master valve turns of early and won’t restart. 

This is happening to all zones

If I shut down the app and restart, it works for the 2.5 min and shuts down again. 

I was wondering if there had been a software update ?

Thanks. 

瀏覽: 2028   回覆: 1

App Crashes on login iOS 15.1.1

Jamie Campbell
更新時間 2021-12-29 10:45:55 UTC 
話題: Netro App

Hello,


Every time I go to login to the app, it crashes back to the iOS Home Screen. I’m running iOS 15.1.1 on an iPhone mini.


Can you help?

瀏覽: 1801   回覆: 2

No restrictions set, yet program is skipping because of user restrictions

alan.ashby
更新時間 2022-01-02 11:40:53 UTC 
I have no restrictions set, yet the app is indicating that restrictions are set and scheduled days are being skipped when they should not be.  Please see app screen shots.
瀏覽: 1701   回覆: 1

Weather not updating

Mick Faulks
更新時間 2022-01-05 00:20:42 UTC 

NetroWeather not updating, other weather apps only update if they are resubmitted every couple of days, is it possible to add other weather providers to the app?

瀏覽: 2025   回覆: 2

i have problem with netro sprite 6

Nguyễn Vinh
更新時間 2022-01-06 04:51:41 UTC 
I am a distributor of netro products in Vietnam market
My customer just sent back a product with a burnt electronic device inside (pictured). can you tell me what the possible reason is and how to fix it.
- 220V (stable) power supply
- no lightning or explosion
- Full safety equipment to protect electrical equipment when there is a problem.

Thank you very much

瀏覽: 1899   回覆: 1

What is the expected format for entering weather underground? weather id?

August Divjak
更新時間 2022-01-07 23:41:01 UTC 
For
KFLORLAN660 Id in weather underground app,. The setup continues to state that I should supply a valid I'd code.  I've tried many different ways with no luck.  Can you help here?
瀏覽: 1894   回覆: 1

No wifi connection

lawnguy4
更新時間 2022-01-10 05:16:03 UTC 
Just got the Sprite 6 controller and it won't connect to Wi-Fi. I have a mesh wi-fi system and the controller has full bars but it just refuses to connect. I reset it a couple times , I  unplugged and plugged it back in , I tried deleting the app and doing it again and still no luck. I just keep getting an error saying ''Action control parameter missing or value is empty'' no clue what that means. Can anyone give me some advice on what else I can possibly do to make this work.. Thank you.
瀏覽: 1702   回覆: 1

Netro is watering at 25F because it is misinterpreted weather

Ben Aggus
更新時間 2022-01-11 12:15:06 UTC 
I had to cancel watering because it’s 25F this morning. It’s because the weather is misinterpreted. The forecast today is 58/34, but that means it will be 34 for tonight’s low. Last night’s low was 25 and the Netro should look at that number for watering this morning. 
瀏覽: 2045   回覆: 1

Sensor sending wrong data

Mick Faulks
更新時間 2022-01-14 06:49:41 UTC 

Hi have my whisperer installed in a garden bed, it saying 0% moisture when the soil is quite wet and it is saying temp is 200 C up to 380 C I have reset it many times but continues to give these readings.

瀏覽: 1991   回覆: 1

App Crashes on login iOS 15.1.1

Jamie Campbell
更新時間 2022-01-16 22:09:35 UTC 
Every time I go to login to the app, it crashes back to the iOS Home Screen. I’m running iOS 15.1.1 on an iPhone mini. I have tried deleting and reinstalling the app several times and the app works until I put my login details in, then it crashes.
瀏覽: 1904   回覆: 2

Pixie smart timer battery not charging

Becky Aquino
更新時間 2022-01-23 00:57:20 UTC 
Anyone have an issue with the pixie battery not charging from the unit using solar? My battery level is down to 19% and I live in Hawaii, lots of sun. Not sure if I did something wrong.
瀏覽: 1792   回覆: 1

Programación

Helidoro Sánchez
更新時間 2022-01-23 09:55:54 UTC 
話題: Netro App
La aplicación se bloquea después de hacer una programación. Se queda con el icono de carga y hay que cerrarla para volver a utilizarla
瀏覽: 1746   回覆: 1

Issue: Weather underground station is

Wessam Elbaz
更新時間 2022-01-26 21:28:38 UTC 
話題: Netro App
Every time I try to setup station I’d for weather underground (INEWCA557). The app says invalid station id. Does any of you have a clue? 
瀏覽: 1643   回覆: 1

Viento

Helidoro Sánchez
更新時間 2022-01-27 20:48:39 UTC 
話題: Netro App

¿Qué unidad de velocidad del viento utiliza la app para establecer la cancelación del riego?

Gracias,

瀏覽: 1841   回覆: 2

Marcos De Maria
更新時間 2022-02-07 19:44:16 UTC 

Buenas ! No logro que prenda el riego .. si ven en la

Foto tengo una electro válvula roja .. para un lado funciona el llenado de la pileta , para el otro el riego x manguera .. en 0 Que es donde está en la foto debería darle la orden la computadora para que encienda la bomba y empiece a regar q estoy haciendo mal ??

瀏覽: 1743   回覆: 2