更多篩選條件

Ideal Soil Moisture

Mike Biondo
更新時間 2021-03-26 01:51:09 UTC 
What is an ideal soil moisture level? My new Netro Whisper is measuring 83% down from 88% 3 hours ago. Is this too moist? It is average raised bed plant soil. I have googled and found some sites saying no more than 45% and some sites say no less than 70% so I am very confused!
瀏覽: 3301   回覆: 1

Wild Swings In Moisture %

Mike Biondo
更新時間 2021-03-27 22:08:54 UTC 

Hi,


I am seeing 20%+ increases in soil moisture when there is no rain and I am not watering and also 20%+ reductions in moisture directly after watering which seems counterintuitive. Is this normal? Can anyone explain what is going on to me? Thank you!


Mike

瀏覽: 2071   回覆: 1

Is SQ Footage needef in the app for each zone

Kevin Westling
更新時間 2021-03-28 06:40:48 UTC 
話題: Netro App
I notice in the App, that there is a field called SQ  Feet. It's this info needed if im setting everything.
瀏覽: 1949   回覆: 1

Smart scheduling problem with sensor watering adjustment configuration

Alfonso Olias Sanz
更新時間 2021-03-29 08:57:05 UTC 

I have checked in the smart schedule that tomorrow is programmed to run zones that should be skipped.

I have set up the whisperer to skip run if moisture is above 40%. Current moisture is:

  • Zone 2 - 92%
  • Zone 5 - 70%


瀏覽: 2226   回覆: 2

Server offline

Mirko Paganelli
更新時間 2021-03-30 16:15:01 UTC 
話題: Netro App
Oggi è tutto il giorno che mi dice Offline... La connessione internet funziona correttamente... C'è qualche problema nel server? 
瀏覽: 1933   回覆: 1

What do the icons mean?

Jim Stichbury
更新時間 2021-03-31 06:55:06 UTC 
話題: Netro App

Hello - just a question about icons / symbols on the schedule.

Guessing the green tick means ‘success’, but what do the warning symbol, and the phone screen symbol mean?



瀏覽: 2014   回覆: 1

Firmware update

Francesco Angelone
更新時間 2021-04-01 13:33:34 UTC 
話題: 安裝

Hi,

my firmware version is the 1.1.1

Please, can I have the last firmware vesion and the instructions for update my controller.

The serial number is E4956E4B6B05


Thank you

瀏覽: 2237   回覆: 1

Light flashing

lightnin
更新時間 2021-04-01 19:11:23 UTC 
話題: 通用
Why is my light flashing on my Netro?
瀏覽: 2006   回覆: 2

Instant watering

hermanins@gmail.com
更新時間 2021-04-03 00:01:28 UTC 
Yard has been fertilized and need to water now as next scheduled is Sunday.
瀏覽: 1878   回覆: 1

Many inexplicable Manual runs

Panos Charalambopoulos
更新時間 2021-04-03 11:37:15 UTC 

Hello everyone ,


During the last hour or so my netro spark has been doing these inexplicable Manual runs. They start and stop on their own without any manual input . Any ideas ?


瀏覽: 2027   回覆: 1

Does the Pixle have to be installed with the water coming into it on the "Hose Faucet Connection" side?

dad@darkroom.ai
更新時間 2021-04-03 19:04:13 UTC 
話題: 安裝

Basically, is the Pixie water control valve one way, or can it shut off/turn on with pressure from either side?  In order to install it so the button faces up, I need to install it so the water comes in what is labeled as the "Outlet" side.  I don't know if it's labeled "Outlet" because it is a male connection, or because it cares about the direction of the water.  Otherwise, I will need to buy a male/male and female/female adapter, flip it "upside down" and use it with the button facing down.


Thanks.


瀏覽: 1893   回覆: 1

Can’t start Netro

Joe Horner
更新時間 2021-04-05 14:47:49 UTC 
After 4 months of non use over winter, I cannot restart my Netro system 

1 sec  blinking of light and have pressed reset button but still get  message “off line” and blinking persists.  

I have a good WiFi signal. 

瀏覽: 1904   回覆: 1

Netro Doesn't respect watering hours in smart mode

jjmengibar
更新時間 2021-04-05 18:16:46 UTC 
話題: Netro App

Doesn't respect watering hours in smart mode.

The time of the zones has only been changed and it cannot be reset and it is watering every 5 minutes.

How can I reset any zone


瀏覽: 2040   回覆: 1

is there a firmware update that i can apply?

jjmengibar
更新時間 2021-04-05 18:19:11 UTC 
Zones 12 Serial number E4956E4B65BD Hardware version 1.2 Firmware version 1.1.3 Last active 2021/04/05 20:11
瀏覽: 2060   回覆: 1

How do I cancel a watering schedule while we make sprinkler repairs?

David Farries
更新時間 2021-04-07 02:16:14 UTC 
話題: Netro App
How do I cancel a watering schedule while we make sprinkler repairs?
瀏覽: 1959   回覆: 1

How often should I water reseed

Abel Vargas
更新時間 2021-04-09 00:49:42 UTC 
I am currently located in New Jersey. I just reseeded my back yard and lawn on Monday. How often should I water them and what times would you recommend 
瀏覽: 3104   回覆: 1

Adding multiple sensors to a Pixie

phatd
更新時間 2021-04-09 18:13:11 UTC 
話題: 通用
I have a mister setup with multiple Herb racks and raised garden beds. I just got a Pixie and a few Whispers. My hope was using one Pixie and monitoring each bed with a whisper. Is this possible? Can I create multiple zones? Is this something going forward that might be possible? I don't want to set them up as standalones.
瀏覽: 1893   回覆: 1

Moisture Level

Des Mullin
更新時間 2021-04-09 23:48:09 UTC 
話題: Netro App
Due to external factors on our property it would be very useful to be able to set the current moisture level for a zone. Is there a way to do this ?
瀏覽: 2043   回覆: 1

Disable a zone

fernando colon
更新時間 2021-04-10 14:15:21 UTC 
Ive been trying to remove/disable a zone however the app is not allowing me to do so.  Is there an alternatuve method?
瀏覽: 2907   回覆: 1

How to delete a device

Scott Gustafson
更新時間 2021-04-10 16:04:18 UTC 
話題: Netro App
I wanted to add a whisper sensor to my existing system.  I accidentally added it as a new device.  I did eventually add the new whisper sensor to my original device.  The issue is I now have two devices in the app.  The first is a device named Sprinkle that has my three whisper sensors attached and a second device named Plant Sensor with nothing attached to it. I want to delete the device  named Plant Sensor.  I cannot find a way to delete it.  

Thanks,

Scott

瀏覽: 2029   回覆: 1