更多篩選條件

controller kept go offline

Tungster Tran
更新時間 2020-09-05 01:12:13 UTC 
Hello, wondering why my watering controller kept going offline.  Once turning it off/on, it will goes online again but will go off in several hours later.  Is it time for me to get a new controller?  I hope not
瀏覽: 2467   回覆: 2

Remove Plant Sensor dropdown

Scott McKay
更新時間 2020-09-05 21:09:40 UTC 

Could you please remove “Plant Sensor” from dropdown menu at the top of the screen?


瀏覽: 2046   回覆: 1

Temporarily stop all watering

Williams
更新時間 2020-09-07 15:57:32 UTC 
話題: 通用
How do I temporarily stop all watering without losing the programming?
瀏覽: 2265   回覆: 1

Netro and Google home

Cesar
更新時間 2020-09-08 08:26:17 UTC 

HI 

I have netro with 3 sensors. I do have google home at home and I would like to connect. I following the instructions BELOW, with no success, because i cant find the buttom LINK to be redirected to accouunt login page

Could you please help



Please use your google assistant app to find "Netro Sprite", either by directly typing "talk to Netro Sprite" or searching through the google assistant explorer. Then tap the "link" button, and you will be redirected to the account login page. After using your Netro account to be successfully linked, you will be able to use google home to work with Netro. You can talk to your Google home like: "Hey google, ask Netro Sprite to water zone two for 5 minutes." or "Hey google, ask Netro Sprite to stop watering." The Netro Sprite should start/stop watering accordingly.


瀏覽: 1994   回覆: 1

Shut down for winter

Chad Fuller
更新時間 2020-09-10 02:01:10 UTC 

What’s the best way to shut these off for winter ? 

瀏覽: 2524   回覆: 1

Rain Snow Delay

R H
更新時間 2020-09-10 03:35:37 UTC 
How do I get the rain delay function to work?
瀏覽: 2164   回覆: 1

IFTTT - Watering Schedule

Christophe Benoit
更新時間 2020-09-10 05:56:28 UTC 

Hello,


I am using the IFTTT event "Schedule". I can then get the information related to a watering schedule when it is finished as expected but "start time" and "end time" are wrong since there are two hours of lag with reality. For example when it actually started at 6:25 am it gives me 8:25 am and same sanction for the end time.

My controller is located in France.


It would be nice if you could fix this issue or tell me how to configure.


Thanks in advance,

Christophe Benoit

瀏覽: 2214   回覆: 1

Way to add weather stations

Curt Lizzi
更新時間 2020-09-12 01:16:55 UTC 
I find the Weather apps to be very inaccurate with respect to rainfall at my home. Is there a way to add a near by weather station for better accuracy?
瀏覽: 2251   回覆: 1

Potted plant on terrace

Andrea Zorgniotti
更新時間 2020-09-14 07:46:03 UTC 

Hi I Have a big terrace with many plants divided in 3 zone controlled by Netro. To use the smart watering and have an acceptable time/frequence for watering (6 min every 2.5 days) I have to set user and from 80% to 85% umidity. If I set frequent or extra water the estimated frequency is 4/5 days. Considering in summer my setting seems nor giving enough water to plants what kind of setting do you suggest to increase the frequency (change msq, kind of sprinkle or whatever).


Thanks in advance for answer

瀏覽: 2226   回覆: 1

loose connection on install

Lawrence Jones
更新時間 2020-09-15 22:49:22 UTC 
話題: 安裝

The unit is working good, yeah!  The way the wires get tab/push for contact is really cheap.  The "spring" of the contact is very , very loose.

Move the wire at all and no contact.  Then trouble shooting to find where trouble is.  Not a good design. Need a much more firm grip on the bare wire. something else or just poor quality?


瀏覽: 2211   回覆: 1

Start time change

Franco Storato
更新時間 2020-09-16 06:00:59 UTC 
話題: Netro App

Hi,

How can I change the start time for all the stations?

Thank you in advance, 

Franco

瀏覽: 1997   回覆: 1

Contact

Santiago Errazuriz
更新時間 2020-09-16 14:44:36 UTC 
話題: 通用
Hello good morning, greetings from Chile. I need to know if I can have a whatsapp or contact email.
瀏覽: 2090   回覆: 1

Simple on/off

gmcg1984
更新時間 2020-09-17 01:54:35 UTC 
話題: Netro App
 Isn’t there a simple way to remote trigger the device from the app without all the time constraints? It does not seem easy for me to, for example, turn on the device and let it run for three hours when I’m away from home and then turn it off remotely. I want to use this to hook up a fire suppression system.
瀏覽: 2058   回覆: 1

Multiple sprinklers in one zone - and is there a Test System ?

Cormac Champion
更新時間 2020-09-19 13:48:55 UTC 

Hi there,


Can zones be setup with several sprinklers in the one zone ?  From what I can see from another question, is it correct that you setup the aproximate size of each zone ?  I have several zones with maybe 10 sprinklers in each zone, with sprinklers about 3m apart.


Also, is there any access to a test / simulation system that I can setup my location and see how well it would adapt to weather.  I am planning the installation for southern Spain


Thanks in advance

瀏覽: 2166   回覆: 1

HomeOwner

Isaac Fishman
更新時間 2020-09-21 01:14:55 UTC 
Netro app worked fine for 4 months. Then zone 3 stopped watering, but netro is showing zone 3 as watering.  How do I fix this? Thanks!
瀏覽: 2091   回覆: 1

Controller LED Light

Texas AF
更新時間 2020-09-22 14:01:57 UTC 
My controller light is attracting bugs at night.  Is there a way to disable the always on LED and just have it blink if there is a problem?  
瀏覽: 2089   回覆: 1

Second house

HaccasDave
更新時間 2020-09-29 18:20:51 UTC 
話題: 安裝

I'm in the very fortunate position of having 2 homes - one in the UK and one in Spain. We've just had the garden reworked in the UK and I've been able to install an irrigation system controlled by a single Sprite controller. 


I'm very pleased with how this is working - and now want to upgrade the manual irrigation system we have in our Spanish house to a smart system. Can Netrohome / the (Android) app manage 2 different irrigation systems in 2 different locations (with 2 very different climates)?


Many thanks.

瀏覽: 2176   回覆: 1

Zones not watering but show watering on App

Atif Khan
更新時間 2020-10-01 14:21:57 UTC 
話題: Netro App
I just bought a replacement controller for my old Hunter. All connections are done by color codes as per old controller and I see all zones in App but when I manually try to test each zone, only one of the 10-zones start. However, when I press STOP, it does not stop. What’s wrong in manual testing ?
瀏覽: 2015   回覆: 1

OFFLINE

Javier López-Guerrero
更新時間 2020-10-03 08:20:26 UTC 

My SPRITE-12 is permanently offline. I tried to reconnect it but RST button doesn’t work. I push it for less than one second and nothing happens.

Help!

Javier

瀏覽: 2009   回覆: 2

Switch Off automatically

Carlos Jimenez
更新時間 2020-10-09 20:18:31 UTC 
話題: Netro App
Hi, I just bought a new Netro Sprite 12 device.
But I had have some problems when I try to run with a differents solenoid valvules.

I found two cases,

1) I start my zone in test mode. Switch-on and ok, swich-off, doesnt run. I try to switch on again, nothing happen,  Switch-off and, solenoid vavule close. Why does not stopped?!

2) Star my zone and run, in a few seconds (sometimes less a one second), automatically stop. Why? Maybe wifi problem?

I dont understand what the problems are...

Pls coulsd you help me, as far as possible?
Thanks 

瀏覽: 2083   回覆: 1