Inaccurate readings

Julie Huynh
Updated at 2021-10-02 00:54:34 UTC 

My Netro Whisperer is starting to give what seems like random moisture reads. It does from 49 to as high as 85 and saying moisture level increased when nothing was watered.

View: 727   Answer: 2

Can you implement this improvement?

Growbro
Updated at 2021-09-29 23:10:23 UTC 
Under the tab which has the history of moisture that can be sorted by today, week, month - please make the today tab the same as the week and month tab. It is much easier to see and more useful to see if the data is laid out from left to right in a line graph, rather than in two different circles for AM and PM - you have to switch back and forth which isn't ideal, and it's harder to see when the moisture drops are happening.
View: 528   Answer: 1

Connecting Pixie to Google Home

SteveRTR
Updated at 2021-09-28 18:41:34 UTC 

I have the Pixie set up and working and showing in the Netro App. When I go to link Netro to Google Home the error message I get is no devices were found in your Netro account. The Pixie is definitely in my account.

Any help appreciated.

Thank You,

Steve 

View: 545   Answer: 2

Battery Charging issue

Billy Wood
Updated at 2021-09-23 14:08:21 UTC 
I have a Whisperer that the battery runs down on, even when placing it in good sunshine. I can place it under a lightbulb a couple inches away for a couple of days and it charges up. But after placing back in th yard it goes down again. This is after placing it right next to another Whisperer that charges just fine. Have tried deleting and reinstalling. Is there something else I should try?
View: 581   Answer: 1

No actual data in APP shown

J H
Updated at 2021-09-21 07:10:31 UTC 

I installed my Whisperer and it seemed to work but after a couple of days when I checked the APP it just shows 0 at all three datafields. I see values in the overview (weeks, month etc.) though. What can I do to correct this? 


View: 585   Answer: 1

Zone name

Michele Russo
Updated at 2021-09-21 02:24:05 UTC 

Hello. I cannot chance The nome of zone. Only Zone1- Zone 2 but IS more nice with name. Can you help me ?


View: 499   Answer: 1

Schedule

nessy
Updated at 2021-09-20 15:06:51 UTC 

Hi

My watering unit is programmed to water my lawn as necessary under the programs algorithm. However, I have numerous days when the watering is done twice— for exam0e it will run all the zones and immediately run the same zones again.  Anyone know how to fix that?

View: 641   Answer: 1

What does the attention icon means?

Shai Amiel
Updated at 2021-09-20 10:25:23 UTC 
What do the attention icon means it appears sometimes next to the smart schedule 
View: 518   Answer: 1

Moisture reading not working

Nancy Lamm
Updated at 2021-09-18 22:32:21 UTC 
It has rained for past 2 days and it still says moisture in grass is 50-60%. I don’t have sensors but my understanding is it supposed to change due to weather forecast! It doesn’t so not very smart!
View: 490   Answer: 1

Default Smart Zone settings

Ken Laberteaux
Updated at 2021-09-17 00:51:11 UTC 

Each Smart Zone can be set to a preset, e.g. Frequent, Deep, Boost, EPA, etc.  If you click Customized, you can choose the Min and Max Soil Moisture, and the Flow Rate (inches/hour).  Presumably, there is a default value of these three choices for each of the presets.

How can I find out what the presets are for these three values?  e.g. for the EPA preset, what is the Min, Max, and Flow Rate?  Same question for all of the Smart Zone presets.

Thanks!

Ken

View: 605   Answer: 1

turn watering off without deleting schedules

BOB COOPER
Updated at 2021-09-16 17:05:56 UTC 
I want to turn watering off without deleting schedules.  I need to do some repairs
View: 544   Answer: 1

Moisture sensors not working

Nancy Lamm
Updated at 2021-09-15 14:13:04 UTC 
It rained yesterday yet my moisture sensors have not changed. How do you reset it or get it to measure correctly??
View: 642   Answer: 1

No data registers as zero

Dave C
Updated at 2021-09-10 22:06:38 UTC 

If I leave my sensor for a while it stops recording new data. The days where there is no data is recorded as a zero. This is obviously not correct.  Any plans on updating this?

View: 521   Answer: 1

Disconnect wifi almost every day without reasong

paolo cellini
Updated at 2021-08-26 14:17:28 UTC 

Hi

Netro disconnect almost every day 

from wifi , without any reason(such as  Internet connection  missing / electricity black out ) 

I have to unplug and rebooting  it goes back automatically to wifi connection

What i have to do to avoid this ? 


View: 567   Answer: 2

trouble connecting sprite to wifi

Gary Walloch
Updated at 2021-08-22 13:48:00 UTC 
I reset my netro sprite as work was being done on my sprinkler system.  It came back on slow blink.  I have not been able to reconnect to my internet.  when setting up netro shows up on my phone with good wifi connection, but will not connect. I have turned data off and still not luck. I have unplugged Netro sprite and still no luck. If anyone has any ideas please share.
View: 552   Answer: 1

javier58
Updated at 2021-08-21 02:52:17 UTC 
What is the moisture range for St. Augustine grass ?
View: 534   Answer: 1

Insertar programss

Gaspar Morey
Updated at 2021-08-20 20:01:36 UTC 

Tengo diseñados una serie de programas de riego.. ¿Como puedo insertarlos en el día en que quiero regar? P. ej. : día 21 de agosto quiero aplicar el programa "5"


View: 516   Answer: 1

Adaptador

Roberto Baltar
Updated at 2021-08-16 05:47:49 UTC 
Hola. 

Quería saber si este adaptador es válido 

View: 641   Answer: 2

Skip zone

the2brads
Updated at 2021-08-11 22:21:07 UTC 
We have 11 zones...I want to skip 1-3 and 7-8 an have them water every other day. I can't seem to figure it out! Unless I do it manually?
View: 574   Answer: 1

Google Home

Michael Wheatley
Updated at 2021-08-11 15:45:28 UTC 

I have two controllers: a Sprite with 6 zones and a Pixie faucet controller.  I would like to use Google to start and stop watering on the Pixie faucet controller.  The User Guide FAQ says:


"3. What if I have multiple controllers?

Unfortunately, Google Assistant doesn't support multiple devices. The NetroHome action controls your first Netro controller. If you have multiple Netro irrigation controllers, please try with Google Home."


How do I control the PIxie in the Google Home app?

View: 590   Answer: 1