Photinia Fraseri Red robin area setup and others

Hi , I'm an Italian happy owner of the netro sprite since last summer :)

Last year I used a classic static programs, this year I want to try the smart side of the platform, I've set my seven zones (square meters,type, etc), but I've some questions:

1) I've two zones with Photinia Fraseri Red Robin (zone3,7), in the database I've set the "Photinia Fraseri", but I've a doubt for the area in sqm, is it square meters or linear meters? If I try to set 50sqm or 25 the water not change, is it correct?

2) The algorithm put 107minutes every 14.5days, I've ask to my gardener and he told me that it's too much water (about double) for that plants in this period. Can i set up only this zone with customs specs?

3) I want to buy the Whisperer sensors, but in Amazon.it there is only the sprite, if I buy by netrohome portal the delivery may be slow, there are additional customs duty,etc. Any chance to see in Amazon.it?



Thanks in advance



Answer From Netro Support

Logo
Netro Support
 Updated at 2020-03-25 05:40:00 UTC

Dear customer,


1. As to set up sqm, the unit is square meter. If you change the area, the water usage will be different. Netro uses the area and depth flow rate(inch/hour) to calculate the water usage. When the sprinkler system is professionally designed and installed, the zone is usually covered evenly, which means the large the zone is, the more sprinkler heads it needs. So the equation we use is Area(inch^2) x depth flow rate (inch/hour) x time (hour) = water usage(inch^3)


2. Yes you could set your zone with customized mode. To adjust smart watering, please go to settings->zones->select a zone->smart zone and choose your preferred watering mode. You can choose "customized" mode to adjust watering by providing the preferred moisture level and flow rate of your sprinklers.


3. We plan to sell on Amazon. it in the second half of 2020. Currently you can buy Whisperer sensors on our website and the delivery time takes about on week. Free shipping on orders over $ 150.


Thanks,

Netro Support


View: 3297    Like: 0

7
Giacomo
2020-03-28 21:55:42 UTC  
Thank you for the answers!
I’ve 7 zones distributed in three side home, how many whisperer sensor do I need? Don’t tell me one per zone!:)
The last question, any chance to have 3bmeteo in the forecast provider? Dark sky and accuwheather isn’t accurate here..

Thanks in advance
Logo
Netro Support
 2020-03-30 03:08:35 UTC  
Dear customer,

Netro allows one sensor to monitor up to 3 zones but the user needs to make sure the zones have similar environmental conditions. Please refer to this article about Plant Sensors Monitoring Multiple Zones
http://www.netrohome.com/forum/posts/432

Currently we have not supported 3bmeteo yet. But we support Dark sky accuwheather and weather underground PWS https://www.wunderground.com/, which should be similar with The Weather Channel, as both owned by IBM.
I will forward your reqeust to our R&D.

Thanks,
Netro Support

37
savaGroof savaGroof
 2022-06-12 11:47:32 UTC  
Pcmrvx Her physician noticed a midsystolic murmur characteristic of f DVT MVP LDL https://newfasttadalafil.com/ - generic for cialis Cialis Sans Ordonnance Forum Untfcr Bbweqh Buy Propecia 1 Mg Online Safely cialis 40 mg MODERN MEDICINE The Fight Against Cancer TTITUDES TO ILLNESS CHANGE OVER TIME Voerlf viagra cialis combo https://newfasttadalafil.com/ - Cialis