watering usage doesn't match

8
Sangjin Lee
 更新時間 2019-06-21 22:49:22 UTC
話題: 通用

Here is something I cannot reconcile. I am dealing with a pretty big water usage reported by the utility. It says in the month of May I used 530 GPD (gallons per day). I seem to be watering every 3 days (set by Netro).


Compared to winter months when I rarely watered the lawn due to the rainy season, it is a jump of ~ 270 GPD.


When I check the Netro app, it reports I used ~ 3.5 CCF for the month of May. 1 CCF = 748 gallons, and that translates to roughly 87 gallons per day. This is less than 1/3 of what the utility is telling me. How can this discrepancy be explained? Any ideas/tips for finding why I seem to be using this much water? Thanks in advance!

瀏覽: 4192    關注: 2   

1 回覆    點擊回覆以查看完整回覆和評論。

Logo
Netro Support
更新時間 2019-06-24 05:35:36 UTC

Hi Sangjin,


The water usage is estimated by Netro, not accurate value which is impossible without a flow meter. Here is how we estimate the usage:
1. Calculate the watering time T, which is accurate.
2. Based on your sprinkler type, Netro estimated the flow rate R, which is pretty accurate. E.g. around 1.5inch/hour for Spray Head.
3. Get the zone area from your setting: A.
4. Estimate the water usage as T*R*A.

As we can see, the most error could be from the zone area. By default, we use 1000 square feet, but your zone could be way more smaller of larger. So the usages could also be much smaller or large than the real value. To get a more accurate water usages, please update the zone area with accurate value in settings->zones->Area in sqft.

If you think watering is too much, you can adjust smart watering. Please go to settings->zones->select a zone->smart zone and choose your preferred watering mode. You can choose "Eco" mode to reduce watering. You can also choose "customized" mode to adjust watering by providing the preferred moisture level and flow rate of your sprinklers.

Yours,
Netro Support