User profile photo

Wency Pan


回复

Rescheduling the watering schedule

19
Wency Pan
更新时间 2022-09-30 01:23:46 UTC

Dear customer,


You can adjust smart watering through Settings->zones->specific zone number->smart zone-enabled->Mode. You can choose "customized" mode to adjust watering by providing the preferred moisture level and flow rate of your sprinklers. (you will see the estimated water time after adjusting the percentage)


If you do not want smart zone schedule to override your own programmed schedule, you can set up the Smart Zone level from Advanced to Basic, which only skip rainning days for your programmed schedule.


For more information about Netro smart watering, here is an article about Netro three watering modes which might be helpful. https://netrohome.com/forum/posts/111


Thanks,

Netro Support

Irrigation program,

19
Wency Pan
更新时间 2022-09-28 05:22:42 UTC

Dear Rosario,

If you enable the smart zone feature and set Smart watering Level as "advanced",  your zones will be watered automatically by Netro with smart schedules. Netro will not water your zones automatically if your smart zone feature is disabled. Please go to Settings->Zones->Smart Zone to check.

If you turn on the smart zone feature, Netro will skip the schedules(including manual schedules from user programs) when there is a chance of significant rain.


If Netro did not water according to your own programs, could you please send us email to support@netrohome.com with your Netro account registered email?
We will have our technician look into this issue. 
 
Thanks
Wency
Netro Support






Sprite-6

19
Wency Pan
更新时间 2022-09-27 06:31:11 UTC

Dear customer,


The controller have a steady white light if it is connected. You can find the digital version manual book through this link https://www.netrohome.com/en/shop/help_center?category=installation&serial=SPRITE

 

Thanks,

Wency

Netro Support

Smart watering schedule is running for long periods

19
Wency Pan
更新时间 2022-09-23 02:36:56 UTC
Dear customer,


Could you please send us email to support@netrohome.com with your Netro account registered email? We will have our technician look into this issue. 


Netro's algorithm encourages longer water time and less water frequency, which will help growth of the roots. If you think the smart schedules water too much, you can also set up your own programs and set up your smart zone in basic level. Please check this article for more info. https://netrohome.com/forum/posts/111 


Thanks
Wency
Netro Support

Watering during a restriction

19
Wency Pan
更新时间 2022-09-21 05:59:48 UTC

Dear customer,


Could you please send us email to support@netrohome.com with your Netro account registered email?

We will have our technician look into this issue. 

Thanks
Wency
Netro Support

It Rain and still watering my garden

19
Wency Pan
更新时间 2022-09-20 06:15:47 UTC

Dear Fernando, 


If you turn on the smart zone feature, Netro will skip the schedules(including manual schedules from user programs) when there is a chance of significant rain(>0.2inch).

Netro gets weather forecast data from our weather provider, which could be not accurate enough, as weather forecasting is challenging.

You can check the weather data on the home tab. If it is not correct, you can select other weather provider in settings->weather provider, you can also select the weather station ID with the Wunderground option. 


You can also customize the weather restrictions now. In the new release (version 1.5.1),  this is in setting -> preferences -> rain. By default, Netro skip schedules today and tomorrow if today rains more than 0.2 inch. You can customize it, like I want to skip the schedules on the day after tomorrow as well, or I want to skip if rain more than 0.5 inch.


Thanks,

Wency

Netro Support

Not watering

19
Wency Pan
更新时间 2022-09-19 03:10:58 UTC

Dear customer,

Please check the wires. Are they loose or disconnected from the slots? Please also check the common wires and the master valve if you have one. If you believe the wires are correctly installed, please check if there is a main valve/faucet that is turned off manually. 

To test if the controller is working properly, use a multimeter (AC voltage mode) to test the voltage between the common wire and the zone wire when the zone is active. Normally the voltage should be between 24V and 28V.

You might also want to check whether there are shorted zones or open zones. You just need to use a multimeter to measure the resistance between the common wire and each zone (remove the wires from the slots before testing the resistance). The normal reading would be 20-60 Ohms. If the reading is less than 10 Ohms then you might have a shorted circuit in the solenoid and if it is larger than 80 Ohms you might have an open circuit. 

Thanks,

Wency
Netro Support

Mulch impact on duration

19
Wency Pan
更新时间 2022-09-15 08:11:43 UTC

Hi John,


We recommend you to choose boost mode to increase the watering amount as Netro did not know the soil contains mulch. You can also choose "customized" mode to adjust watering by providing the preferred moisture level and flow rate of your sprinklers. 

Please go settings->zones->specific zone number->smart zone-enabled->Mode.

Thanks,

Netro Support

Different symbols in the app

19
Wency Pan
更新时间 2022-09-15 02:32:28 UTC

Hi Leon,


The yellow triangle only means after the unit execute the schedule, when it send signal to the cloud, the cloud did not receive the signal, which may be caused by internet glitch. As long as your unit is online and your sprinklers run , you do not need to worry about that. 


The unit download schedules everyday on the local, when it execute the schedules, it do not need internet. Only after the execution of a schedule, it will send signal to the cloud to let the cloud know if has finished the schedules. 

Thanks,

Wency

Netro Support

quick stop every watering

19
Wency Pan
更新时间 2022-09-13 06:22:27 UTC

Hi Lee, 


We have released the new version of the app and you can check it in Apple store or Google Play. In the new version, you can stop watering in the manual run section from the home page. 


Thanks, 

Wency 

Netro Support

Cannot reset Sprite

19
Wency Pan
更新时间 2022-09-13 06:18:32 UTC

Dear customer,


Please follow the steps to see if it works:


1.Power off the device(unplug the power adapter)
2.Wait for 2 seconds, replug the power back in
3.Wait for 3 minutes for the device to start up
4.Press the reset button for less than 1 seconds to do a soft reset (use a pin insert to the RST hole button, when you feel a "click" release the button)
5.Wait for 5 seconds. This should set the light to slow blinking.


Thanks,

Wency

Netro Support

Add a manager

19
Wency Pan
更新时间 2022-09-13 06:15:20 UTC
Dear customer, 

Please first let the shared user download the app and use his own email register an account with Netro. Then you can add his/her email as a shared user in your account. Please go settings->controller->manage users->add manager. 

Please check this article about adding multiple users. https://netrohome.com/forum/posts/147

Regards, 

Wency

Netro Support

Can't schedule after programming restrictions

19
Wency Pan
更新时间 2022-09-13 06:14:36 UTC

Hi Jay,


Could you please provide more details about "cannot reprogram"? Please check if the prorams are enabled.


Thanks,

Wency

Netro Support

Custome schedule being ignored

19
Wency Pan
更新时间 2022-09-08 02:05:10 UTC

Hi Ethan,


Could you please disable/reset self learning feature to see if it works?Netro smart schedules are based on the overall moisture. The home page shows the overall moisture, while the plot shows the sensor moisture. The sensor moisture is high while the overall moisture level is low.


Thanks,

Wency

Netro Support

Watered while sensor above the skip limit

19
Wency Pan
更新时间 2022-09-07 07:50:02 UTC

Hi Alfonso,


Could you please send us email to support@netrohome.com with your Netro account registered email?

We will have our technician look into this issue. 

Thanks
Wency 
Netro Support

Adding weather station to weather underground

19
Wency Pan
更新时间 2022-09-06 07:24:32 UTC

Dear customer,


We have updated it for you now. Previously the app has a bug to prevent user add station ID from the app and we have released the new version of the app which has fixed this bug now.  You can download it in Apple store or Google Play. 


Thanks,

Wency

Netro Support

Smart Watering is too much, Custom Program doesn't show up

19
Wency Pan
更新时间 2022-09-05 08:44:40 UTC

Dear customer,


Could you please send us email to support@netrohome.com with your Netro account registered email?
We will have our technician look into this issue. 

Thanks
Wency 
Netro Support


IFTTT out of sync

19
Wency Pan
更新时间 2022-09-05 07:55:36 UTC

Hi Andy, 


We did not reproduce the same issue. We just checked your schedules and it looks good now. Could you please keep monitoring your device and let us know if it still has issues. 


Regards, 

Wency 

Netro Support




Two zones running at the same time

19
Wency Pan
更新时间 2022-09-05 06:49:49 UTC

Hi Jesse,

Could you please send us email to support@netrohome.com with your Netro account registered email?

We will have our technician look into this issue. 

Thanks
Wency
Netro Support

How many rain sensors?

19
Wency Pan
更新时间 2022-09-02 01:09:13 UTC

Hi Roland,


You can place one sensor in each zone for best watering results. Currently each zone only allows one sensor.


Thanks,

Wency

Netro Support