Logo

Netro Support

居住在: Camarillo, CA, US
使用: SPRITE-12 , SPARK-16 , SPRITE-6 , WHISPERER-1
增長: Kentucky Bluegrass, Maple

回覆

Support for IFTT

Logo
Netro Support
更新時間 2019-06-26 02:17:53 UTC

Hi Shahid, 


IFTTT charges very high to start up and we plan to implement it when there is good deal with them. 


Thanks, 

Netro Support




Remove whisperer

Logo
Netro Support
更新時間 2019-06-26 02:12:48 UTC

Hi Dan,

If you want to move the stand alone sensors to a zone, first you have to go to Settings->Sensors->Edit(upper right corner) and then delete the sensor. Next you will have to go to the home page. There is a drop down menu and please select your Sprite controller, then go to Add a Product-> Plant sensor and then select the zone and complete the following procedures to add the sensor. You will need to press the button 6 times on the back of the sensor to change its mode to Setup mode (light blinking slowly).


Thanks,

Netro Support

Manual scheduled run did not run

Logo
Netro Support
更新時間 2019-06-25 02:58:21 UTC

Hi Yanke,


If you turn on the smart zone feature, Netro will skip the schedules(including manual schedules from user programs) when there is a chance of significant rain(>0.2inch). Your one time run schedule was skipped by rain restriction. You can check it in the schedule page. 

If you want to run your one-time run schedule, pleases use the "run a cycle now" feature. Please go to Settings->Programs, choose your one time run, scroll down and tap "run a cycle now" and Netro will start watering instantly.


Regards,

Netro Support

Restriction for specific days

Logo
Netro Support
更新時間 2019-06-25 02:14:08 UTC

Hi Ken,


Please go to Settings->Restrictions to add a restriction if you want to skip watering, you can select zones, months to restrict watering. However, currently Netro does not support create restrictions for a specific day in advance. I will forward your request to our R&D and will consider support this feature in the future release of the app.


Regards,

Netro Support

Google Home Commands not Working

Logo
Netro Support
更新時間 2019-06-24 06:56:08 UTC

Hi Derrick,


This could be speech recognition error. Could you please input the command in the google assistant and check it if works: "Talk to netro sprite to water zone 1 for 5 minutes"


Thanks,

Netro Support

Netro Sprite not adhering to "Time Frame" setting

Logo
Netro Support
更新時間 2019-06-24 06:02:51 UTC

Dear customer,


We just checked your account and we find time regulation in your area: No watering between 6 am and 5 pm. So Netro will only water your zones before 6 am or after 5 pm. Please let us know if the water regulation is correct.


Thanks,

Netro Support

watering usage doesn't match

Logo
Netro Support
更新時間 2019-06-24 05:35:36 UTC

Hi Sangjin,


The water usage is estimated by Netro, not accurate value which is impossible without a flow meter. Here is how we estimate the usage:
1. Calculate the watering time T, which is accurate.
2. Based on your sprinkler type, Netro estimated the flow rate R, which is pretty accurate. E.g. around 1.5inch/hour for Spray Head.
3. Get the zone area from your setting: A.
4. Estimate the water usage as T*R*A.

As we can see, the most error could be from the zone area. By default, we use 1000 square feet, but your zone could be way more smaller of larger. So the usages could also be much smaller or large than the real value. To get a more accurate water usages, please update the zone area with accurate value in settings->zones->Area in sqft.

If you think watering is too much, you can adjust smart watering. Please go to settings->zones->select a zone->smart zone and choose your preferred watering mode. You can choose "Eco" mode to reduce watering. You can also choose "customized" mode to adjust watering by providing the preferred moisture level and flow rate of your sprinklers.

Yours,
Netro Support


Start / End time

Logo
Netro Support
更新時間 2019-06-22 10:40:09 UTC

Hi Junglim, 

If you enable the Smart Zone feature, Netro will water your zones automatically. The "Start Time" and "End Time" on the scheduling page is for customizing start time and end time of smart watering but will not completely ensure to restrict smart watering to a certain period. For example, Netro will still water outside the assigned time if Netro believes the watering duration set by users is not enough. 

To restrict the smart watering to a certain time period, please go to Settings->Restrictions to add a restriction for your zones. 


Thanks, 

Netro Support


Not enough water

Logo
Netro Support
更新時間 2019-06-19 05:41:10 UTC

Hi Robert,


If the boost mode is not watering enough, you can choose the "customized" mode. You can adjusting  "low" and "high" soil moisture to increase the watering frequency, and  the "flow rate" to make Netro water longer each day. For example, low as 65%, high as 100% and set flow rate to 0.4 or even smaller.


Thanks,

Netro Support

Notification

Logo
Netro Support
更新時間 2019-06-18 01:45:05 UTC

Hi Christophe, 


Thanks for contacting us and we are happy to hear you like our Sprite controller. Yes notification is available and you need to enable Netro App notification in your smart phone settings. Currently we only have notification for users about device is offline because we want to keep the app as simple as possible and do not want to spam user with too much notifications. 


Thanks, 

Netro Support


Notifications

Logo
Netro Support
更新時間 2019-06-18 01:43:06 UTC

Hi Cam,


Currently we only have notification for users about device is offline because we want to keep the app as simple as possible and do not want to spam user with too much notifications, but I will definitely forward your suggestion to our R&D. 


Thanks 
Regards 
Netro Support

Rain Delay

Logo
Netro Support
更新時間 2019-06-17 08:45:31 UTC

Hi Peter,


To add a rain delay, you can go to the Schedule page of the app, press the + sign on the right upper corner and select Rain Delay. If you want to review the created rain delays, you can go Settings->Restrictions and your the rain delays will be shown. You can edit and delete the existing rain delays too. Please refer to this forum article

https://www.netrohome.com/forum/posts/282/show_question


Thanks,

Netro Support



Keeps watering after heavy rains!

Logo
Netro Support
更新時間 2019-06-14 05:56:18 UTC

Hi Dan,


As rainfall amount varies significantly even in a small area, the weather data could be not accurate enough for your place. Netro still watered your zone after heavy rain, this might because the weather forecast said there was going to be a small rain but it turns out to be a big one. The soil moisture level will not increase a lot after small rain so Netro still watered your zones to keep the soil mosute level up. You can go to the Home page, tap the moisture level(%)  in a circle in the zone area to check the soil moisture level of your zone by week/month.


Of course, all weather forecast could be wrong. Netro tries the best to provide accurate watering schedule even with incorrect forecast. First, we periodically update the weather data, once the weather data is changed, we update the un-executed schedules ASAP. Second, we re-check the weather data for the past, update our model, and adjust following schedules accordingly. For example, Netro may not water today due to large rainfall from forecast data. The next day, Netro re-check the weather data, if no rainfall found and your soil is dry enough, Netro will water accordingly.


Thanks,

Netro Support


One Lawn, 2 Zones

Logo
Netro Support
更新時間 2019-06-12 04:02:34 UTC

Hi Matt,


Sprite cannot determine that these zones are watering the same area. We suggest the settings and parameters of two zones be the same. Is there any overlapped area between your two zones?

Thanks,

Netro Support

Google Home

Logo
Netro Support
更新時間 2019-06-11 02:08:33 UTC

Hi Alfonso,


We only support Google Home voice control in English. Please use your google assistant app to find "Netro Sprite", either by directly typing "talk to Netro Sprite" or searching through the google assistant explorer. Then tap the "link" button, and you will be redirected to the account login page. After using your Netro account to be successfully linked, you will be able to use google home to work with Netro. You can talk to your Google home like: "Hey google, ask Netro Sprite to water zone two for 5 minutes." or "Hey google, ask Netro Sprite to stop watering." The Netro Sprite should start/stop watering accordingly. Currently these are the only two commands that we support. We will add more in future, for example, running a specific program.

 

Please let us know if you have any further questions.

 

Thanks,

Netro Support

Netro Inc

Military time

Logo
Netro Support
更新時間 2019-06-10 05:33:25 UTC

Hi Matty,


Maybe some pages are 24 hours. Could you let us know the pages which is  24 hours? Our default watering is morning unless there's not enough time for watering in the morning. Watering changed to PM watering is not caused by weather provider. It does not matter which weather to choose. 

It is possible that it is in the afternoon when you change the watering, so the watering activities can only be scheduled in the afternoon. Watering should be in the morning in your following watering schedules.


Regards,

Netro Support


Change start time for a single day only

Logo
Netro Support
更新時間 2019-06-09 04:38:35 UTC

Hi,

You can add restriction to change the start time for a single day. Please go to Settings->Restrictions, choose your zones and select the start time and end time. 

Regards,

Netro Support

Amazon and Google connection in Gernany

Logo
Netro Support
更新時間 2019-06-04 02:23:36 UTC

Hi Piti,


Netro currently only support English in Google Home and Alexa skills. We have not support Germany yet. We are looking for translations in Germany, then we will publish it later.

Please use your google assistant app to find "Netro Sprite", either by directly typing "talk to Netro Sprite" or searching through the google assistant explorer. Then tap the "link" button, and you will be redirected to the account login page. After using your Netro account to be successfully linked, you will be able to use google home to work with Netro. You can talk to your Google home like: "Hey google, ask Netro Sprite to water zone two for 5 minutes." or "Hey google, ask Netro Sprite to stop watering." The Netro Sprite should start/stop watering accordingly. Currently these are the only two commands that we support. We will add more in future, for example, running a specific program.


Thanks,

Netro Support



How the smart watering is scheduled?

Logo
Netro Support
更新時間 2019-05-31 01:32:49 UTC

Hi Shane,


Some zones are watered multiple times a day, you probably selected clay, clay loam or loam as the soil type which accepts water slowly, often as little as 1/4 inch per hour and that is why we break the watering into many pieces to avoid water runoff.

Netro's algorithm is based on expert gardening knowledge, one of which is to avoid watering equally everyday and instead to water less frequently but deeply. Netro waters your garden only when the soil is dry enough in order to draw more oxygen into the roots, leading to a lusher landscape. By default, we allow the moisture level to deplete to a low level (recommended by EPA) before next watering and that is why you might see longer watering duration than the original settings on your old controller.


Thanks,

Netro Support

Constant Blinking

Logo
Netro Support
更新時間 2019-05-31 01:27:46 UTC

Hi Seth,

The Sprite unit will blink quickly whenever it is trying to (re)connect to a WiFi network. This happens when you first set up your unit, or whenever it loses its connection. If you have not changed your home WiFi, try to reboot the Sprite (unplug and replug the power) and the connection might be restored. It may also blink slowly when it is in host mode. This happens when you first plug in your Sprite or reset it, and indicates that it needs to go through the setup steps to connect to a home WiFi network.

Thanks,

Netro Support