更多篩選條件

Smart schedule failed/ watering outside perameters

Kyle Giacomini
更新時間 2019-07-01 16:32:17 UTC 

My controller keeps losing connection to the wifi. Is there a way the app can send a notification when that occurs? 

Also, my smart watering program skipped the zones during this time. I thought if the controller was offline the programs would continue as  scheduledt? it would be nice to know why the program was skipped, like a diagnosis log of the errors.

Additionally, the controller randomly started the irrigation programs outside my set time peramerters. I'm afraid the controller is glitching out. I believe this all occured when the controller was disconnected from the internet. 

瀏覽: 2847   回覆: 1

Adapter in EU

Lukas2002
更新時間 2019-07-01 11:06:15 UTC 
話題: 安裝
Hi, 
I am Lukas from the Netherlands. I have ordered a Netro sprite-6 on without a power adapter. 
In the Netherlands we have 230V AC on the power grid. I am having serious trouble to find a power adapter that goes to 24V AC 800mA. 

The only one I can find has an output of  24V AC 1000mA, will that be ok? 

Or is there a better alternative out there?


Thank you, 
Lukas Zwanenburg (NL)

瀏覽: 3000   回覆: 2

Auto connect to Internet after outage

Nipun Devlekar
更新時間 2019-07-01 01:01:18 UTC 
Will this controller autoconnect to internet after an outage just like my Nest does ?
瀏覽: 2521   回覆: 1

internet may not be available

Bruce Vermeulen
更新時間 2019-06-30 18:31:02 UTC 

We got our Netro two weeks ago and set up went just fine.

Yard was being watered, great.

Two days ago our power went out, came back on an hour later.

Netro light blinking slowly tried to reconect and all i get is

Internet may not be available, rest of the house is conected.

Any help would be appreciated.

Thank you

Bruce

瀏覽: 2613   回覆: 0

Whisper shipping

Matty B
更新時間 2019-06-30 13:31:58 UTC 
話題: 通用

Hi,


I ordered a sensor and have yet to receive it. It has been well past 4 weeks. 

Number is: 180404 ― May 17, 2019

What is the status of the order?

Thank you. 

瀏覽: 2907   回覆: 2

WiFi connection

Andrew
更新時間 2019-06-27 00:49:26 UTC 
Has anyone had a difficult time getting the device to connect? When I get to step 5 of the setup process it says the connectivity is unsuccessful. Up to that point it says all the other connections were successful. I’ve reset my router and the controller. 
瀏覽: 2465   回覆: 0

Watering Times

terry
更新時間 2019-06-26 22:02:52 UTC 
All of our watering done with drip systems and I wondered if there is a way to water longer than 60 minutes for a zone?
瀏覽: 2750   回覆: 1

PIR sensor

Vito Favaretto
更新時間 2019-06-26 20:06:49 UTC 
話題: 通用

I always find cats dejections on my garden but I  cats are not mines. I had an idea to avoid these cats' gift, installing a PIR sensor connected to netro controller by wifi that transmit a signal to water garden at cats presence. Cats don't love water so they leave my garden very quickly.

Do you think you can build a sensor like this?

I.could be a beta tester ;)



瀏覽: 2710   回覆: 1

Google Home app questions- just installed my Netro Sprite!

jdonhowe
更新時間 2019-06-26 04:16:22 UTC 
話題: Netro App

I just installed my Netro Sprite and am having fun investigating all the options. After some false steps, I was able to link it to my google home account. so, my questions:

1. When I go through google, do I always have to say "Okay, Google, talk to Netro Sprite", and then when Netro responds, give a command, such as "water zone 1 for five minutes". Is there any way such that I can say directly to google "water zone 1", and Netro will do it (like smart light switches)- I don't have to tell google to tell TP-link to turn on the bedroom light!

2. I know that Netro controls zones sequentially (only one on at a time). When I ask Netro (through google home) to water zone 1 for x minutes, it then asks "what else can I do for you". If I say "water zone 2 for x minutes, it looks like it immediately turns off zone 1, and turns on zone 2. So, does "what else" mean "instead of", rather than "in addition to" the first command? Is there any way to get it to recognize sequential zone commands?

3. I've renamed my zones in the Netro app (nice touch- always hated having to remember zone numbers with old controller. Is there any way for the Netro google link to recognize (like google home does with devices) the name of a zone? It would be great to say "water front lawn for five minutes" instead of having to remember which zone it is.

瀏覽: 2973   回覆: 1

Support for IFTT

Shahid Warraich
更新時間 2019-06-25 17:25:17 UTC 

Anyone kows if IFTT is supported, if yes then any help with how to will be appreciated.

Thank you.

瀏覽: 2739   回覆: 1

Remove whisperer

Dan Orms
更新時間 2019-06-25 16:17:24 UTC 
How do you remove a whisperer so you can re-add it?
瀏覽: 2869   回覆: 1

Restriction for specific days

Ken Wiens
更新時間 2019-06-24 18:20:32 UTC 
話題: Netro App
I want to create restrictions for a set of specific days in the future.  Birthdays of family members for example. Or days that I have outdoor entertainment planned. I want to set these up long in advance (before a smart schedule has been scheduled.) How can I do this? 
瀏覽: 3004   回覆: 1

Manual scheduled run did not run

Yanke Liang
更新時間 2019-06-24 11:07:31 UTC 
Scheduled a one time run for a certain time in Settings->Program, but the app didn’t show the run in the schedule and the irrigation did not run either. Any idea how to set up a one time run when smart feature is enabled? Thanks 
瀏覽: 2839   回覆: 1

Netro Sprite not adhering to "Time Frame" setting

Jonathan B.
更新時間 2019-06-24 03:20:54 UTC 

Hi... I've set my Netro Sprite's watering "time frame" (under Settings) to be between 7 and 11pm. It still however schedules its watering start time at 6pm.  How can I fix this?


Thanks

瀏覽: 2996   回覆: 2

Google Home Commands not Working

Derrick
更新時間 2019-06-23 13:34:06 UTC 
For some reason, when I give Google the command to "talk to netro sprite to water zone for 5 minutes" or "ask netro sprite to water zone for 5 minutes" Netro comes back and says "I have stopped watering.  What else can I do for you?"  It won't do anything else but turn off the zones.  Why is this?
瀏覽: 3030   回覆: 1

watering usage doesn't match

Sangjin Lee
更新時間 2019-06-21 22:49:22 UTC 
話題: 通用

Here is something I cannot reconcile. I am dealing with a pretty big water usage reported by the utility. It says in the month of May I used 530 GPD (gallons per day). I seem to be watering every 3 days (set by Netro).


Compared to winter months when I rarely watered the lawn due to the rainy season, it is a jump of ~ 270 GPD.


When I check the Netro app, it reports I used ~ 3.5 CCF for the month of May. 1 CCF = 748 gallons, and that translates to roughly 87 gallons per day. This is less than 1/3 of what the utility is telling me. How can this discrepancy be explained? Any ideas/tips for finding why I seem to be using this much water? Thanks in advance!

瀏覽: 2770   回覆: 1

Start / End time

Junglim Huh
更新時間 2019-06-21 10:14:14 UTC 
I have set start/end water time in preference, but it is watering outside the assigned time. Anyone else experience that, and how can I fix this?
瀏覽: 2638   回覆: 1

GPS position

alesee COA
更新時間 2019-06-21 08:24:13 UTC 

Hello

I've just installed the irrigation controller  , but I have not GPS signal at my home . Now I have default position ( AL , USA) and I want to change into Italy. how can I do it ?  Thanks in advance for your help !


瀏覽: 2664   回覆: 1

Not enough water

Robert Arnold
更新時間 2019-06-19 03:22:58 UTC 
My lawn is not getting enough water. I have the watering set to boost and still not enough. Any other settings available other than manually triggering zones?
瀏覽: 2625   回覆: 1

Amount of Rainfall keeps changing

Swaroop Jay
更新時間 2019-06-19 02:47:10 UTC 
話題: Netro App
Netro app keeps changing the amount of rainfall that we have had. Day before yesterday it rained heavily. The very next day Netro app showed that it rained 1 inch. Today it’s showing that on that same day it rained only 0.33 inch. Any idea why it keeps fluctuating for something that has already happened in the past?
瀏覽: 2713   回覆: 1