更多篩選條件

Select suitable plants for slope

Netro Support
更新時間 2018-12-13 07:48:53 UTC 

Select suitable plants for slope



Growing plants in some area with slopes may be more difficult than level gardens. A lot of challenging factors should be taken into consideration, for example, the different soil conditions, the sunlight condition, the slope condition, etc. Netro's smart watering would take care of these factors. Please go to Settings->Zones , select your zone and choose your soil type, slope condition and other settings.


The top priority is to evaluate the pitch and runoff. If the pitch is more than 30 degrees, it might be a good idea to terrace the area to prevent topsoil from eroding and all moisture evacuating every time you water or it rains. Once you have solved any moisture retention and erosion problems, it is time to evaluate the site further for exposure and zone, and plan what plants grow on slopes. The types of plants you choose will depend not only on your visual preference and vision but also the needs of the area. Deep rooted plants help stabilize soil, trees add dimension and shade to prevent excess evaporation, and low growing ground covers cover up unsightly areas with ease of care.


Although growing plants on a hillside can be a challenge, once established they can transform the area and help keep soil from slowly weeping down into the flatter parts of the terrain. Taller shrubs and bushes add many seasons of interest and will help give the area a sculpted appeal. Just remember that young plants will need additional moisture, staking and training as they establish. To keep maintenance down, choose plants that produce very little mess which would otherwise require extra work to clean up annually. Some plants that work well on slopes include:

Burning Bush 

Fragrant Sumac 

Japanese Yew 

California Lilac 

Creeping Juniper 

Dwarf Forsythia 

Snowberry 

Siberian 

Carpet Cypress


Read more at Gardening Know How: Choosing Plants For Sloping Areas – What Plants Grow On Slopes https://www.gardeningknowhow.com/special/slope-hill/plants-that-grow-on-slopes.htm

瀏覽: 5031   評論: 1

Needing to connect to a new device

Rebekah H
更新時間 2018-11-28 04:23:43 UTC 
話題: Netro App

My phone broke and when I tried to connect my new one to the sprinkler, I get an error message saying that our Netro is linked to another device and must be deleted from it before it can connector to my current phone. Is there anyway to reset the controller? 

瀏覽: 2948   回覆: 1

Water pump shutting off

Ryan Cochran
更新時間 2018-11-26 02:32:24 UTC 
My water turns on then about a minute into the cycle it will suddenly shut down. The app says it is still going but water is not coming out of the sprinklers. Help  
瀏覽: 2950   回覆: 1

Scheduling ( Two Smart watering levels; Smart disabled)

Netro Support
更新時間 2023-06-09 06:07:25 UTC 

There are 2 different levels of Netro’s smart watering you can choose (For Netro watering controller, please go to Settings->Zones->Smart Zone; for Netro Pixie timer, please go to Settings->Garden->Smart Zone)


 1. Smart watering: Level advanced

This is the default setting of Netro watering controller's smart watering. In this level, your zones will be watered automatically by Netro with smart schedules.

Netro will do everything for you, you do not need to set up the program/schedule.

Netro will skip smart watering and programs when there is large amount of rain(>0.2inch/ 5.08 mm) or watering regulations and manual restrictions.

You can inspect the Smart schedules in the calendar view. They are with the blue water-drop icons.

 

 

2.Smart watering: Level basic

This is the default setting of Netro Pixie timer's smart watering. In this level, no smart schedule will be generated. You will need to add programs manually (go to Settings->Programs to add programs) and Netro will skip programs when there is large amount of rain(>0.2inch/ 5.08 mm) or watering regulations.

 If you do not want smart zone schedule to override your own programmed schedule, you can set up the Smart Zone level from Advanced to Basic, which only skip rainning days for your programmed schedule.

Please note when smart zone is enabled, your local regulations will automatic override your own program if there is any conflict. So when you set up your own program watering time, please do not conflict with your local Regulations if there is any. To check up regulations, please go to Settings->Regulations.

 

 

3.Smart-zone feature disabled

If you want to create your own programs and turn off smart zone feature and rain delay feature, go to Settings->Zones->Smart Zone (Settings->Garden->Smart Zone for Pixie Timer) and toggle the enable button. When the smart zone is disabled, the system will strictly follow the user program to water the zones. There is no intelligence here. Netro will not skip your schedules when there is rain. Regulation feature will not be in effect as well.


瀏覽: 11647   評論: 12

EPA rebate status?

Joshua Berk
更新時間 2018-11-04 07:39:58 UTC 
話題: 通用
Hi I was wondering if we could get an update on where Netro is with an EPA rebate? We're aware Netro has applied, but any word or ETA on getting certification for rebates?  Thank you
瀏覽: 3314   回覆: 3

Skipping skipped?

livingwater71
更新時間 2018-10-31 16:11:03 UTC 
Live in Hawaii and yesterday we had flood level rains and to my disappointment Netro watered this morning even though I have it set to skip if it rained the previous day. Anyone have this happen?
瀏覽: 2847   回覆: 1

Service

Matt Lasser
更新時間 2018-10-31 16:01:30 UTC 
Listen.  This timer is really bad.  How do I let a service man run my timer I don’t want to give him my phone at least with the Rachio I can grant temporary access this is not worth the money at all
瀏覽: 2928   回覆: 1

Is there a way to water multiple times during the day?

George Zraick
更新時間 2018-10-27 20:05:15 UTC 
I have this fern area in a desert climate. Is there a way to do short spirt misting multiple times a day?
瀏覽: 2999   回覆: 1

Moberley

moberleyj@verizon.net
更新時間 2018-10-17 16:59:29 UTC 
My controller is blinking. Hasn’t done that before. Ideas?
瀏覽: 2881   回覆: 1

connecting to wifi..

Phani Gade
更新時間 2018-10-15 17:20:42 UTC 
Hi: i am having issues connecting to wifi.. i have been using the Netro for more than one year..still having issues with connecting to wifi. it gets connected for some time and disconnects. it is been happening. is it issue with Netro it self or something i have to do. i see all the bars on my phone at netro.. 
瀏覽: 2710   回覆: 0

Customization->set rain/temperature/wind threshold to skip watering

Netro Support
更新時間 2018-10-13 06:19:08 UTC 

Customization->set rain/temperature/wind threshold to skip watering

Netro automatically creates dynamic watering schedules according to local weather, so if you turn on the smart zone feature for your zone, season adjustment will be made with smart watering schedules according to weather.

There are different types of weather restrictions: rain, temperature and wind.

By default, If you turn on the smart zone feature, Netro will skip the schedules (including manual schedules from user programs) when there is a chance of significant rain(>0.2inch).

The default threshold to skip watering when temperature is too low is 0 Celsius degree (32 Fahrenheit) for all the Netro controllers.

You can now customize rain, temperature and wind threshold through Settings->Preferences.




瀏覽: 4232   評論: 0

Put Sprite in "paused" mode in winter

Netro Support
更新時間 2023-11-07 06:09:05 UTC 
話題: Netro App

Put Sprite in "paused" mode in winter 


To put Sprite in "paused" mode in winter, you will have winterize your system. First you will have to blow out the sprinkler. You can look at this video to find some useful information. 

https://www.youtube.com/watch?v=s3YRbJYmvgA&t=99s


This video mentioned that you will have to turn on the sprinkler, so you can use the instant manual run feature in the home page to manually start watering for each zone to make sure all the water is out of system.


Then you should put Sprite in "paused" mode just in case some one (for example the kids) accidentally starts a manually run from the app. To put Sprite in "paused" mode, you can go to the Home page->"Enabled". 






瀏覽: 5556   評論: 1

Controller

Phil Samson
更新時間 2018-10-12 18:41:33 UTC 
My controller shows that it’s online but the app is saying I’m offline. How do I correct this?
瀏覽: 2803   回覆: 0

How can I give my landscaper a way to manage the watering cycles?

Joshua Berk
更新時間 2018-10-10 06:22:09 UTC 
話題: Netro App
I would like to be able to share this account with my wife and my landscaper so they have access to turn things on and off when needed. Especially when I'm going to have my landscaper do work on my sprinkler system to fix the heads he needs to be able to test it easily without me being there.
瀏覽: 3026   回覆: 3

New seeding

Douglas Ely
更新時間 2018-10-09 23:09:48 UTC 
Here in ocean city NJ, when we seed for new grass we need the water to come on twice daily to start germination. When I set my Netro to “new plant” and the soil type to “sandy clay” which is the top layer, the controller had only been watering every 2.21 days. The soil is dust dry. I don’t want to have to make gross adjustments. That is why I bought Netro. What’s wrong?
瀏覽: 3529   回覆: 3

Disable all zones for winter

Wayne White
更新時間 2018-10-09 23:05:21 UTC 
話題: Netro App
It’s winter, I have manual zones and 3 sprites. Is there a way to disable the sprites? There has to be. A simple switch I’m missing. 
瀏覽: 2782   回覆: 1

winterizing

Ken Siebert
更新時間 2018-09-29 11:26:05 UTC 
話題: 通用
How best to winterize system
瀏覽: 3421   回覆: 1

App Crashesdevice

Aaron Miller
更新時間 2018-09-16 11:28:35 UTC 
話題: Netro App
The app crashes on android phone (S8) when attempting to set rain preferences. This is annoying. None of my messages regarding this have been answered by tech support. Perhaps I should return the device and get a Rachio?
瀏覽: 2690   回覆: 0

New grass seed

Dan R
更新時間 2018-09-09 21:47:24 UTC 
It would be great to have a feature that runs the sprinklers three times a day for 7 days when I put down new grass seed. I can build a program for this and it does not take very long. It would be a nice feature to have this built into the app. 
瀏覽: 3033   回覆: 1

Sprite not running zones after power outage

Rob Platko
更新時間 2018-09-08 17:28:57 UTC 
Hi, my Sprite does not run any program on any zone following a power outage.  The zones are scheduled, I can see them in the calendar, but they don’t run.  Anyone seen this problem?
瀏覽: 2796   回覆: 0