更多篩選條件

Default rain settings

jbart65
更新時間 2020-05-12 21:31:24 UTC 

What is the default setting for not watering the day before and after a rain day? I think it was to skip the day before and of, but not the day after (wish I could reset defaults). Why is the default what it is?


Also, why is the rain delay trigger 0.2? What would happen if I changed it to 0.1?

瀏覽: 2361   回覆: 1

hedges

Andrea Colombelli
更新時間 2020-05-14 19:45:52 UTC 
hi, which setting is recommended for irrigating hedges?
瀏覽: 2304   回覆: 1

No 2.4GHz wifi

Carlos Oliveira
更新時間 2020-05-16 11:29:24 UTC 
話題: 安裝

Hi,


My netro has been working fine for the past many months.


Suddenly it stopped working and light blinks.

I try to configure the Wifi again and it states 



I am sure my 2.4 GHz network is available there as I have 2 other devices 10 Cm away from the netro and are working fine at 2.4GHz

I can confirm that in my Orbi Router.


Any ideas ?


Thank you

Carlos 

瀏覽: 2479   回覆: 1

Link to smart light

Noam Leshem
更新時間 2020-05-16 17:53:06 UTC 
Is it possible to link an activity such as a scheduled zone watering to switch a specific smart light? I have 6 smart lights in my kitchen and would love if they where linked to my 6 watering zones. 
瀏覽: 2338   回覆: 1

Program set for 20 minutes per zone but watered for only 5 min

EASTBOBDAM D
更新時間 2020-05-17 13:18:19 UTC 

Hello All, I have three zones and created a program to do a deep water for 20 min. Starting from 5AM and ending at 6AM which is expected to run every 3 days. This morning was the first time I ran it and noticed on my home screen it said watered for 5 min. Any reason why this changed? I'm thinking smart watering has to do with this? If so, I'd like to try and keep this feature for the rain aspect (not to run when it will rain). I read if you disable smart watering (which I can't find this feature anymore), then it will still run the  program when it rains,anyway if I'm in the right ballpark to have your cake and eat it too. 


Thanks in advance

瀏覽: 2240   回覆: 1

Zones are not activating since I changed 1 of the solenoid

Yves Desrosiers
更新時間 2020-05-17 18:31:27 UTC 

Hi

Had to replace a solenoid on the valve on one of my 2 zones and when I do a manual 5min watering on zones 1 or 2 none of them start. I can hear the click of the main valve opening but none  of the zone 1 or 2 valves is opening...if I use the override on the valve to open manually, the water does pass...seem the controller is not sending any open command to eather solenoid of zone 1 or 2 ..

Thanks for your help :)

瀏覽: 2239   回覆: 1

Watering program

Maciej Karpinski
更新時間 2020-05-18 01:01:57 UTC 

Hi there,


I recently installed the Pixie, and have set up both the smart feature and a regular watering program. The watering program was supposed to go off this evening, but it didn’t. I then checked in the schedule, and all I saw were any restrictions and the smart watering schedule. My program was not there. I set the filters to show me the enables program, but it still does not appear. I have no way of telling with the program has been initialized. Is this a glitch? Should the program appear on the schedule? Why did it not activate when it was supposed to?


Thanks.

瀏覽: 2362   回覆: 1

Pixie sync Sprite

Sebastian Diaz
更新時間 2020-05-19 02:50:59 UTC 

Hello, i have a netro sprite with 6 zone, i need controlate when i watering zone 4 (example) on sprite... open the pixie too. It is possible ?


Thanks you Sebastian

瀏覽: 2645   回覆: 1

Do not water when it rains or rain is expected

Kobus Marneweck
更新時間 2020-05-19 03:33:33 UTC 
話題: Netro App
I replaced my Rainmachine with a Netro but I cannot configure it to do what the Rainmachine did. I live in Austin And can only water 1 day a week. Water is incredible expensive so I  cannot use Smarzone because my water bill will be too high. I want to run each zone for 20 min once per week and not water when rain is expected or it is raining. Netro does seem to be able to do this. Any suggestions?
瀏覽: 2461   回覆: 1

Best settings for garden

Alexandre Morin
更新時間 2020-05-20 11:01:20 UTC 
話題: Netro App

Hi, 

I have a bed garden with multiple types of vegetables. My irritation type is drop emitter and I bought the humidity sensor Whispered and Pixie.  My garden surface is 100 square feets


I wan to know what is the best app settings to have the best results. The app contains lots of settings and I am little confuse!


thanks

瀏覽: 2746   回覆: 2

Need any (netrohome.com) payed cloud service?

Roman Prochazka
更新時間 2020-05-22 07:55:46 UTC 
話題: Netro App

Hello,

I to plan buy Netro Sprite splinkler controller. But I need know if I need pay any fees for using Netro app. Because the app using account at netrohome.com websuite.

Many thanks for early answer

Best Regards
Roman


瀏覽: 2483   回覆: 2

Using measured flow rated instead of estimated

Wayne Richards
更新時間 2020-05-23 16:07:26 UTC 
話題: Netro App
I understand that Netro estimates water usage based on time, emitter type,  and square footage,  but I  have access to actual flow rate via a Flume flow rate monitor. Is there a way to replace the flow rate estimates with actual rates for each system? 
瀏覽: 2361   回覆: 1

Rearranging zones?

Kurt H
更新時間 2020-05-23 19:17:20 UTC 
話題: Netro App

I do enjoy my Netro, and the app makes things pretty handy.  I do have a couple of questions.


Are there any plans to allow the software to rearrange the zones in a watering cycle (or is that already available and I am just missing it?)  Right now it seems I am stuck watering in the order I have wired the controller.  It would be nice to water one zone, let that soak in while watering another zone, then come back and water a third zone that is adjacent to the first zone.


Another question I have is - is it possible to copy a schedule so that I do not have to set each of the 5 zones for every schedule.  There are times when I would like to run a one time schedule that follows my normal dry schedule,  or follows my moister schedule.

瀏覽: 2550   回覆: 1

Pressure compensated drip hose

Simon Clark
更新時間 2020-05-24 17:22:21 UTC 
話題: 安裝

Hi


I use Netafin pressure compensated drip hose on all my beds and there doesn’t seem To be an irrigation type for that. Is it OK using the drip setting which seems to be for micro drippers. 


Thanks

瀏覽: 2438   回覆: 0

Is it possible to name zones for easier identification

Chris Graham
更新時間 2020-05-24 20:37:39 UTC 
話題: Netro App

I'm evaluating whether to by a Netro and one of the things I need is to be able to name zones rather than have a zone called say "Zone 6".

I don't see any users manual on your site to answer questions like this.


瀏覽: 2591   回覆: 1

Is a full time wifi connection required for watering? Or any other unattended modes of failure?

Chris Graham
更新時間 2020-05-24 20:43:23 UTC 
話題: 通用

If wifi is disrupted will the controller continue to water acording to the most recently programmed schedules?


More generally are there any modes of failure (other than loss of power to the house) where the controller can unexpectedly halt watering?  It would be unacceptable to have one's garden die from lack of water if the system fails when one is away from home for a number of days.

瀏覽: 2681   回覆: 1

Moisture level showed by sensor

Alfonso Olias Sanz
更新時間 2020-05-25 16:08:09 UTC 


Sensor 2 says moisture level is 7% after very heavy rain, but the weekly view says 92% 


瀏覽: 2540   回覆: 1

Web interface

Emanuele Floridia
更新時間 2020-05-27 16:58:10 UTC 
話題: Netro App
Hi, sorry but is there the possibility of a web interface, without using the Netro app?
瀏覽: 2455   回覆: 1

Delay between zones

Nicholas Lydakis
更新時間 2020-05-28 15:39:00 UTC 
話題: Netro App

Can a pump delay be programmed between zones?


Thanks

瀏覽: 2367   回覆: 1

How do I reset all the programs in the watering schedule and clean up the calendar ?

baijuviswam
更新時間 2020-05-28 18:56:02 UTC 
How do I reset all the programs in the watering schedule and clean up the calendar ? 
瀏覽: 2229   回覆: 1