更多篩選條件

Master Valve

Simone Nolletti
更新時間 2020-02-07 09:53:47 UTC 
話題: 通用
Hello, is it possible to implement Netro with the master valve function? I have both well water and drinking water I would like to be able to choose which water to irrigate.
瀏覽: 2475   回覆: 1

Changing ownership of home

Dario Sindicich
更新時間 2020-02-14 01:48:40 UTC 

I'm selling my house with a sprite 12 zone system already set up. How do I transfer this to a new owner without having to reset zones, naming the zones, selecting type of plants and timers?


I know they will have a new wifi router. I think I can set that up. 

瀏覽: 2460   回覆: 1

Watering stop problem

lekter
更新時間 2020-02-14 14:43:36 UTC 

When I start watering to give it a try. Everything's going well. But when I want to stop watering it's impossible. I have to turn off the power so that netro stops the watering.

WeatherPro is the problem ?


For information, I have an electrovanne rainbird.

 Best regards

Arnaud

瀏覽: 2386   回覆: 0

new dripping system using Pixie and Whisperer

Markus Matula
更新時間 2020-02-20 08:52:39 UTC 
I am in the process of designing my dripping system for my beach house in FL. I am thinking about using 2 Pixies and several Whisperers. I have several questions: 1) What happens when the WIFI is down? Does Pixie turn watering off/on on its own? 2) Does Pixie skip a watering cycle when raining? 3) Are the Whisperers connected to the Pixie and App in that the humidity information guides the amount and frequency of watering? 4) What is the recommended soil humidity for new planted palm trees? Thanks, Markus
瀏覽: 2495   回覆: 1

App Crashes on adding product

Tarudro
更新時間 2020-02-24 20:24:10 UTC 
話題: Netro App

Hi,


I just received my Pixie and Whisperer and wanted to set them up using my iPhone. 

Therefore I launch the app and go to "Add Product", select the Pixie and then I'm promted to enter my location and a name for the timer.

When I click on "next" the app crashes and returns to the home screen. 100% reproducible. I tried to enter different adress and name, but couldn't make it work. Crashes every time. 

Reinstall also didn't solve the problem.


Netro App: 2.4.0

iPhone 11 Pro

iOS 13.3.1

German (also tried English)


Let me know, if you need anything else to reproduce/solve this issue or if there is something that I could do to prevent it. 
So far, I couldn't find anything in the forum here.


BR Lukas


PS. I just tried also on my iPad Air 2 - same crash.


瀏覽: 4855   回覆: 4

Order to open eletrovan stil on

Claude Bedarride
更新時間 2020-02-29 14:28:34 UTC 

Hello

After connecting, my smart watering controller works well. But when the time of programm os elpased, or i order to stop watering, the current in the wire is still on. I need to open the circuit and disconect zone wire to permit the electrovan to close water flow.

Why smart controller don’t stop the current order to the ev ?

瀏覽: 2299   回覆: 1

Watering stops after 5 mins

D String
更新時間 2020-02-29 17:22:32 UTC 
The system was working fine when I 1st got it but now when it comes on no water comes out it works for about 5 minutes 'then stops . For when I water all zones the 1st stone will water and then it will cycle through and not water any of the other zones Please help
瀏覽: 2271   回覆: 1

Distance between controller and solenoid valves

Steve Cary
更新時間 2020-03-01 14:42:55 UTC 
話題: 安裝
My controller will be about 20 meters from the solenoids.  What size cable do I need to make this work? Thankyou!!
瀏覽: 2324   回覆: 1

Best weather forecast for south of Italy

Carlo D'Ippolito
更新時間 2020-03-01 14:55:14 UTC 

Hello,

first of all, thanks for your product.

I would like to know which Is the best and most reliable weather forecast for the south of Italy (Apulia region).


Waiting for your feedback.

Kind regards

瀏覽: 2620   回覆: 1

Is it working correctly? 0v test multimeter

yodiego
更新時間 2020-03-07 12:14:59 UTC 
話題: 安裝

Hi good morning,

I’m making the first installation and I see the valves don’t open when I tested it, so I test the connections with a multi-meter and sometimes it gives 24v and sometimes 0.
The last 10 tries it gives 0. I changed the cables and I now I test directly the controller connections and keep giving me 0.
I’m using the manual watering to make the tests.
Is it working correctly?
Thank you for your help.



瀏覽: 2281   回覆: 1

alexa & pixie

stefano banfi gaslini
更新時間 2020-03-11 14:30:37 UTC 

hi,
I have activated the skill for alexa but no pixie device is added to me
(while in google home instead after adding the service my pixie appeared)


what can i do or check to solve?


TNKS

best regards


stefano

瀏覽: 2160   回覆: 1

Benedetto
更新時間 2020-03-11 14:44:38 UTC 

Hi 

Sprite has been successfully installed and tested once each zone (12).

The next day, the decide was offline without any reason and all the attempts to switch off and reset were failed. How I can solve the issue?

Thanks for the support

Br

BG

瀏覽: 2297   回覆: 1

Sprinkler is on during rain

Wahid Ameni
更新時間 2020-03-14 00:12:38 UTC 

Hi,

The sprinkler is not automatically shut off during rain. I have to go to the apps to shut off 

瀏覽: 2354   回覆: 1

Delivering term please

yodiego
更新時間 2020-03-14 18:08:21 UTC 
Hello, I buyed your power adapter the mars 8. what's the deliverying term to receive it in France? I didn't receive any notification...

Hope to hear from you soon. Best regards
瀏覽: 2114   回覆: 1

Whisperer issue

Saul Perez
更新時間 2020-03-15 19:07:50 UTC 
So my whisperer began to fail aboit a few weeks ago. I try reconnecting it and all it does when i press the button is flash a red light. Any help? Cant reset it or do anything at this nm point. 
瀏覽: 2329   回覆: 1

Rain today and it will water tomorrow?

Javier Palomino
更新時間 2020-03-18 02:11:35 UTC 

I had consistent rain yesterday and today and foreseen by smart watering but it still announces watering tomorrow!!?? Why? Attach screenshot



瀏覽: 2207   回覆: 1

pixie does not measure humidity correctly

stefano banfi gaslini
更新時間 2020-03-18 15:16:20 UTC 


hi,

I put whisperer in a garden pot, after a few days I noticed that it indicated that the soil was moist even if it was not.
it was particularly dry.
two days ago I moved it, I made the calibration and zeroed the self-learning but still today it shows me that the soil is moist while the soil in the pot is now particularly dry, it is necessary to irrigate!
indicates that it is 98% wet.

what is wrong?


and while because from the app I only see humidity of the top soil while from the web with the webui I also see the humidity of the subsoil?


tnks

best regards

stefano

瀏覽: 2240   回覆: 1

Instalación wifi

Eduardo Pariente
更新時間 2020-03-20 16:15:47 UTC 
話題: 安裝

Good afternoon. 


 I have problems because I don't recognize the wifi.  I'll explain. First I connect by wifi to netro and it does not give me any problems.  But when I go back to the next screen to connect the mobile to the wifi and the wifi from home no longer appears. He's gone. And I can't continue with the installation.


Regards

瀏覽: 2321   回覆: 1

To save newly planted Healing Garden for Homless Veterans I need how to set up a "Test Run" program on Sprite--Netro closed and virus closedown upon us! HELP Please.

Yohan
更新時間 2020-03-22 00:49:00 UTC 

I have a Sprite installed at a healing garden--part of a new transitional home here in Sebastopol, CA  for homeless veterans on which I was the project manager.  However the non-profit team who will bring in the vets has not taken occupancy yet and the wifi will be theirs.  It says in the netro installation that in case of no wifi , it "might work to use the "test run" program on your iphone on the log-in page.  But I cannot see the "Test Run" option  on my iPhone 6S.  


Please help because with the corona virus shut down, Netro is closed and  it could be weeks before I can get to the site to water it manually and all the plants could perish for lack or water!!!


Thanks for any help,  Yohan Morgan.  707/332-3050, USA  cell. 

瀏覽: 2259   回覆: 1

Smart scheduling problem

Alfonso Olias Sanz
更新時間 2020-03-23 19:15:51 UTC 

This is my set up.

I have a netro device + whisperers 

I have set up the netro to skip the previous day and the next day after raining.

I also have set up the schedule for watering from 6 am to 7 am.

If moisture is above 50%, then watering is skipped.


Yesterday it rained a lot and today all the zones were supposed to be skipped. But one of the zones went down to 45% of moisture and watering was started at 19:22.


1) why this happened?

2) Can I change the moisture level to a lower one? Current limit in the application is 50%



瀏覽: 2526   回覆: 1