How do I know how long a zone watered on its last schedule?

Ron White
Updated at 2019-09-04 16:44:17 UTC 
How to determine prior watering schedule?
View: 339   Answer: 1

System went basqerk?

Ron White
Updated at 2019-08-27 01:21:18 UTC 
My system says it watered yesterday, which it didn’t, and it’s telling me the next watering is in 8 days during my 100 degree days.  What’s going on?
View: 379   Answer: 2

Why water twice a day?

Ron White
Updated at 2019-08-19 19:05:12 UTC 
My 2nd watering cycle on even numbered days is during the highest heat of the day and it’s burning my shrubs in zone 4.  Why not once a day in evening hours for good soaking?
View: 385   Answer: 2

Drain

Moe
Updated at 2019-08-17 23:31:13 UTC 

Hi. 

We r in Toronto canada and we have extremely cold winter , every year we are asking expert to come and drain the water from the system. I would like to know can i do same with running cycle or still i have to ask expert to come and drain the system?

View: 386   Answer: 1

Feature Request: API

cjmulk2
Updated at 2019-08-17 03:18:34 UTC 
Would it be possible to publish your API? I (and I'm guessing many others) would like to be able to integrate Netro into tools like Home Assistant
View: 406   Answer: 3

Alexa skill

Tony D.
Updated at 2019-08-16 23:42:33 UTC 

Hi,

I have searched the Netro skill in the Italian Amazon market but wasn’t able to find it.

What do I need to search for?

Thank you

View: 323   Answer: 1

Zones Shut Off But Show Running in App

Kirk Davis
Updated at 2019-08-16 02:54:33 UTC 

Having a problem since upgrade of the app. Doesn't seem possible unless the main unit updated as well. Valves close within a few minutes of being activated by manual start, or programmed schedule. Have not test with smart watering disabled, but it happens on manual starts, so not sure that is even a variable. The Zone still shows as actively watering in the application. If you submit a stop  action by pressing the red square,then restart, via the sideways triangle, the zone will come back on again. However, it shortly shuts back off, while still showing the zone as being actively watered. This is happening across all four of my zones. Curiously, if you unplug the controller after the valve shuts off, but the app still shows it watering, wait a bit, and then plugit back int-the zone comes backon shortly after reboot.


View: 344   Answer: 1

Suport MQTT? Suport REST API?

Sergio Albarran Rebull
Updated at 2019-08-09 14:25:13 UTC 


I'm thinking of buying Netro Sprite, but I have some questions ...

Suport MQTT? 

Suport REST API?

any plans to integrate with Home Assistant?


Thanks in advance...

View: 429   Answer: 3

Netro on Apple Watch

Netro Support
Updated at 2019-08-07 06:39:26 UTC 

To the Netro community:


We recently have launched an update for the Netro app on App Store. In the newest iOS version (2.3.0) of the app, Apple Watch is now supported.

In the watch app, users will be able to check the status of the device, the weather data, zone status and view watering schedules in the next 7 days.



Please feel free to explore other new and exciting features that we just added (also available on Android) : 

1.Support Weather Underground PWS

(Settings->Controller->Weather Provider)


2.Rainfall adjustment

(Please go to the Discover page and tap the "+" button on the upper right corner,  select "Correct Rainfall")


3.Enable plant sensors to monitor multiple zones

( Settings->Sensors, select a sensor, go to Zones and select the zones you would like to monitor)

Regards,

Netro Support




View: 35036   Comment: 0

Firmware update for System reboot after power issue

Junglim Huh
Updated at 2019-08-06 11:03:17 UTC 
When are you planning release firmware update for sprite having issue connecting to wifi after power issue? This happens quite a bit and my sprite is off line.
View: 350   Answer: 1

Install

Daniel Alman
Updated at 2019-08-05 15:17:08 UTC 
Post install and after first unsuccessful run, it says it watered but it definitely did not, I found an extra wire that I had plugged into ‘C’ next to the ‘M’, that I had left unplugged in my last successful Netro setup. I have now unplugged it and did another unsuccessful run. My question is, when making a wiring tweak like that do I need to press the ‘RST’ before proceeding with a run?
View: 314   Answer: 1

sprite losing connection

Robert hays
Updated at 2019-08-04 15:42:10 UTC 
 good install and was working but later lost connection... what firmware version should it have? how about a windows app ? sprite connects to tablet but claims no internet connection....   your sprite is extremely frustrating compared any other smart devices that does't ask to reset router if it loses connection looking for issues. if every device did this i would need a tech full time so i can have a life
View: 318   Answer: 1

Promise Made- Promise KEPT!

Kirk Davis
Updated at 2019-08-03 04:32:30 UTC 

The new version is exactly as promised! I can't wait to see how it works!

I have configured my WU PWS, and setup a secondary rain guage as well! 

View: 322   Answer: 0

Where's our promised update?

Kirk Davis
Updated at 2019-07-31 11:19:38 UTC 
It's the last day of the month and the new version still hasn't dropped. You are already a month past your original commit date. Please stop marketing products that are add-ons, when the software is lagging substantially. The big companies are going to catch, kill and eat you unless you start running faster. 
View: 332   Answer: 1

Hunter sprinklers

Richard Mundy
Updated at 2019-07-28 20:37:35 UTC 
Hello, does Netro work with Hunter sprinklers - having trouble getting them to work!
View: 335   Answer: 2

Connection-during Initial Set Up-Sprite Smart atering System

riteshmantravadi@gmail.com
Updated at 2019-07-28 15:22:01 UTC 

During step 8, It says "Netro Connected but no internet"

Can you pleas ehelp?

View: 373   Answer: 2

Netro Whisperer

Christopher Martinez
Updated at 2019-07-24 06:20:37 UTC 
I was wondering if anyone knows where you can buy a whisperer sensor?  I am not finding them on Amazon.
View: 375   Answer: 2

HomeKit?

pintapass
Updated at 2019-07-15 03:55:15 UTC 

Are there any plans to add HomeKit support to Netro? I have Alexa but prefer Apple's smart home platform.

View: 497   Answer: 1

No light

Gilbert Lee
Updated at 2019-07-14 15:37:53 UTC 
I changed my network.  Went to change network on sprite.  I get no light.  I pressed the reset button and no light.  Tested my power and I get 24 volts.  Rep luges t in and still no light.  Netro is 1 year old
View: 334   Answer: 1

How do you stop the watering

Rick Jones
Updated at 2019-07-13 16:02:14 UTC 

Is there a way to stop the watering in the middle of a cycle?


View: 404   Answer: 1